Information

For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
ELECTRICAL SOLUTIONS
E5.19
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
Lockout/Tagout Safety Signs
Indoor/Outdoor Sub-Surface Printed Adhesive Polyester
(Type PPS)
• High quality signs for use indoors and outdoors
• Excellent resistance to UV light, chemical atmosphere,
and abrasion
• Excellent life and adhesion properties
• Printed graphics are protected by clear polyester laminate
Indoor/Outdoor Rigid Polyethylene (Type PRS)
• Rugged signs for indoors and outdoors
• Abrasion resistant
• Used where adhesives will not work
Indoor Adhesive Vinyl (Type PVS)
• Economical general purpose signs for use in most environments
• Very good adhesive properties when applied to a clean,
dry surface
Material Chart
Material Print Method
Temperature
Range
Features
Polyester (PPS)
Pre-Printed
-40°F to 275°F
(-40°C to 135°C)
Indoor/outdoor rated; laminated label material
protects legend from abrasion and chemicals;
resistant to UV light, chemical atmosphere, and
abrasion; excellent life and adhesion properties.
Rigid Polyethylene
(PRS)
-105°F to 250°F
(-76°C to 121°C)
Indoor/outdoor rated; high quality, rugged material
resistant to abrasion; use where adhesives will
not work.
Vinyl (PVS)
-40°F to 200°F
(-40°C to 93°C)
Indoor rated; economical general purpose material;
excellent adhesion properties when applied to a
clean, dry surface.
WARNING
LOCK OUT
BEFORE SERVICING
PVS0305W2102Y
PVS0204C171Y
PVS0204C176Y
PVS0204C177Y
HIGH VOLTAGE
PPS0710D72
PRS0710D72
PRS1014D72
PVS0109D72Y
PVS0204D72Y
PVS0710D72Y
PVS0204C178YPVS0204C179Y
PVS0204D100Y
PVS0305C174Y
PVS0505C174Y
PPS0305C174
PVS0305W2101Y^
PVS0507W2101Y^
PVS0204W172Y
PVS0209D445Y
THE FOLLOWING STEPS MUST
BE PERFORMED WHEN LOCKING
OUT EQUIPMENT:
1 - Identify all potential hazards
and energy sources.
2 - Inform operator / supervisor about
work to be performed.
3 - Prepare equipment for shutdown.
4 - Shutdown / turn off equipment.
5 - Isolate and LOCKOUT energy sources.
6 - Release all stored energy.
7 - Test equipment for zero energy state.
8 - Clear personnel / tools before
a
nd after job.
9 - Remove locks and tags when work
completed.
PVS0503N458Y
PRS1014B364
PVS0509B364Y
PVS0710B364Y
PPS0710B364
PRS0710B364
PVS0710C173Y
PVS0710C180Y
^Can be clearly identified with Panduit permanent marking pens.
*Denotes the part numbers’ prefix and suffix.
Size Reference Chart
Part
Number
Width Height
Signs
per
CardIn. mm In. mm
*0109* 9.00 228.60 1.50 38.10 1
*0204* 4.50 114.30 2.25 57.15 2
*0209* 9.00 228.60 2.25 57.15 1
*0305* 5.00 127.00 3.50 88.90 1
*0503* 3.00 76.20 5.00 127.00 2
*0507* 7.00 177.80 5.00 127 1
*0509* 9.00 228.60 5.00 127 1
*0710* 10.00 254.00 7.00 177.8 1
*1014* 14.00 355.60 10.00 254 1
*0202* 2.25 57.15 2.25 57.15 4
*0505* 5.00 127.00 5.00 127.00 1
PPS0202B493