Installation Manual

INSTALLATION INSTRUCTIONS
© Panduit Corp. 2018
FS136A
E-mail:
[e-mail]
Phone:
866-405-6654
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 6 of 6
Figure 15:
Upper cassette
fully installed into
FLEX-OPTI-1RU
FLEX-OPTI-1RU
4. FLEX-OPTI-1RU Compatible Patch Panels and Enclosures
Shown below is a table of patch panels and enclosures compatible with the FLEX-OPTI-1RU. The installation steps explained
above can be used to place the FLEX-OPTI-1RU into the necessary enclosure/patch panel.
Note: FLEX-OPTI-1RU cannot be used with angled patch panels CFAPPBL1A or CFAPPBL2A. FLEX-OPTI-1RU cannot be
used with angled enclosures FMT1A or FMT2A. The depth of FRME** enclosures does not
allow for proper cable routing when
the FLEX-OPTI-1RU is installed.
Part Number
CFAPPBL1
CFAPPBL2
FMT1 (WHEN PAIRED WITH CFAPPBL1)
FMT2 (WHEN PAIRED WITH CFAPPBL2
FCE1U
FCE1UA
FCE2U
FCE4
FCE4U
FMD1
FMD2