Information

ELECTRICAL SOLUTIONS
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
B2.50
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
Fanning Strip System
• Holds wires in a specific orientation
• No sharp edges to damage wire insulation
• Will accept wires up to 18 AWG
• Fanning strip can remain as part of completed harness
Spring Wire Breakout System
• Harness board spring and spring holder holds wire ends secure
while harness is being fabricated
• Wires simply pull out from spring when harness is removed
• Each SHH Spring Holder is supplied with one rigid wire piece to
hold the spring laterally and two #8 (M4), 2" (50.8mm) hex head
wood screws; purchase spring separately
12.1
(307.8)
.31 (7.9)
.04 (1.0)
.12 (3.0)
.16 (4.0)
.06 (1.5)
6.00 (152.4)
.62 (15.7)
.56
(14.2)
1.50
(38.1)
.75
(19.0)
.04 (1.0)
.53
(13.5)
1.10
(28.0)
3.2 (81.3)
1.42
(36.0)
.04 (1.0)
.60
(15.2)
FSH40 FSHH
FS156
A
.44 (11.2)
.53 (13.4)
1.30
(33.0)
.19 (4.8) Dia.
A
SHH
PBSC
Part Number
Hole Spacing
A
Material Color
Mounting
Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.In. mm
PBSC1-X 1.00 25.4
Steel
— SHH1 Spring Holder 10 100
PBSC3-X 3.00 76.2 — Two #8 (M4) Screws 10 100
PBSC6-X 6.00 152.4 — SHH3 Spring Holder 10 100
PBSC12-X 12.00 304.8 — Two #8 (M4) Screws 10 100
SHH1-S8-X 1.85 47.0
Nylon 6.6 Natural
Two #8 (M4) Screws 10 100
SHH3-S8-X 6.80 172.7 Two #8 (M4) Screws 10 100
Part Number Material Color
Mounting
Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
FS156-C Nylon 6.6 Natural FSH Holder 100 1000
FSH40-X
ABS Black
Four #8 (M4) Screws 10 100
FSHH-X Two #8 (M4) Screws 10 100