Information

For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
ELECTRICAL SOLUTIONS
B3.25
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
Pan-Steel
®
Buckles for Custom Length Strapping
• Buckle design provides a low finished profile • After tensioning cut end is locked inside buckle – no sharp edges
Pan-Steel
®
Custom Length Strapping
• Fold over design provides high retained tension in mechanical
fastening and cable bundling applications
• After tensioning, cut end is locked inside low profile buckle – no
sharp edges
• For applications that require various bundle diameters
• Supplied in reels of 82.5 feet (25m) (coated) or 100 feet (30.5m)
(uncoated)
• Provides job site versatility with minimum inventory
• Packaging speeds removal of steel and includes bundle diameter
cut-off guide
• Available in AISI 201(3/4" width only) and 304
stainless steel for general-purpose applications
• Available in AISI 316 stainless steel for the most corrosive
environments
*Other lengths available, contact Panduit Customer Service. ^Base metal less coating.
‡Order in number of reels required.***For information on installation tools, refer to page B3.26.
9"
8"
7"
6"
5"
4"
3"
2"
1"
10mm
20mm
30mm
40mm
50mm
60mm
70mm
80mm
90mm
100mm
110mm
120mm
130mm
140mm
150mm
160mm
170mm
180mm
190mm
200mm
210mm
220mm
230mm
240mm
250mm
3D
(76.2)
2D
(50.8)
(25.4)
1D
DIAMETER
MARKERS(MM)
TAB
CUT-OFF
HANDLE &
RETRACTOR
KNOCK-OUT
HANDLE &
RETRACTOR
KNOCK-OUT
KNOCK-OUT
HANDLE LOCATION
(BOTH SIDES)
METRIC
MEASURE
DIAMETER
CUT-OFF GUIDE
FOLD OVER
RETAINER TAB
10.0
10.0
ENGLISH MEASURE
1.0
Calculate
Diameter inches (mm) x 3.14 + 6 inches (152.4 mm)
To determine the proper amount of strapping required, use the following formula:
Nylon 11 coating (optional):
• Nylon 11 coating provides
additional edge protection
and prevents corrosion
between dissimilar metals
• UV resistant, low smoke,
halogen-free material
• Temperature tolerance
-40°F (-40°C) to 285°F (140°C)
• AISI 316 stainless steel for
the most corrosive environments
Part Number Material
Width
Part Description
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.In. mm
AISI 201 Stainless Steel
MSBW75-C2 201 0.75 19.1 Individual low profile buckles used with metal strapping. 100 —
AISI 304 Stainless Steel
MSBW38-C4 304 0.38 9.5
Individual low profile buckles used with custom
length strapping.
100 1000
MSBW50-C4 304 0.50 12.7 100 1000
MSBW63-C4 304 0.63 15.9 100 1000
AISI 316 Stainless Steel
MSBW38-C6 316 0.38 9.5
Individual low profile buckles used with custom
length strapping.
100 1000
MSBW50-C6 316 0.50 12.7 100 1000
MSBW63-C6 316 0.63 15.9 100 1000
Part Number
Length*
Strap
Breaking
Strength Width Thickness^
Used
with
Buckle
Recommended
Installation
Tool***
Std.
Pkg.
Qty.‡Ft. m Lbs. N In. mm In. mm
201 Stainless Steel
MSW75T30-CR2 100 30.5 2400 10656 0.75 19.1 0.030 0.80 MSBW75-C2 BT75SDT 1
304 Stainless Steel
MSW38T15-CR4 100 30.5 502 2229 0.38 9.5 0.015 0.38 MSBW38-C4
BT2HT
1
MSW50T15-CR4 100 30.5 671 2979 0.50 12.7 0.015 0.38 MSBW50-C4 1
MSW63T15-CR4 100 30.5 839 3725 0.63 15.9 0.015 0.38 MSBW63-C4 1
316 Stainless Steel
MSW38T15-CR6 100 30.5 502 2229 0.38 9.5 0.015 0.38 MSBW38-C6
BT2HT
1
MSW50T15-CR6 100 30.5 671 2979 0.50 12.7 0.015 0.38 MSBW50-C6 1
MSW63T15-CR6 100 30.5 839 3725 0.63 15.9 0.015 0.38 MSBW63-C6 1
Nylon Coated Custom Length Strapping
MSCNW38T15-QR6 82.5 25.0 502 2229 0.38 9.5 0.015 0.38 MSBW38-C6
BT2HT
1
MSCNW50T15-QR6 82.5 25.0 671 2979 0.50 12.7 0.015 0.38 MSBW50-C6 1
MSCNW63T15-QR6 82.5 25.0 839 3725 0.63 15.9 0.015 0.38 MSBW63-C6 1