Information

For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
ELECTRICAL SOLUTIONS
B3.29
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
Stainless Steel Bulkhead Mount
• Zero profile
• Mounts directly to surface
• Used where only one side of the panel is accessible
• Permanent, secure application
• Used with standard, light-heavy, and heavy cross section
Pan-Steel
®
Ties
• 304 Stainless Steel
Part Number
Used with
Pan-Steel
®
Ties/Strapping
Mounting
Method
Length
A
Width
W
Height
H
Max. Panel
Thickness
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.In. mm In. mm In. mm In. mm
MTMBH-Q MLTS/LH/H/EH/
SH, MLTC/H, or
MLTFC/S/LH/H/
EH/SH
Pre-drill hole size standard
and light-heavy cross section
MLT-S/LH .38" (9.5mm) –
.50" (12.7mm).
Heavy cross section
MLT-H .50" (12.7mm) –
.63" (15.9mm).
1.92 48.5 .21 5.3 .54 13.7 .50 12.7 25 250
To Install Bulkhead Mount:
1) Insert cable tie through mount
slot and fold cable tie.
2) Insert cable tie and mount
through panel/framework hole.
3) Pull cable tie back to secure the
mount in the panel/framework.
4) Mount shown in correct position
for installation.
5) Separate cable tie to allow for
bundling of cables/wires, etc.
6) Install cable tie around bundle
and fasten.
W
A
H