Information

ELECTRICAL SOLUTIONS
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
B3.32
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
ELECTRICAL SOLUTIONS
SHOCK AND VIBRATION: Panduit
®
Pan-Steel
®
Standard and Heavy Cross Section ties have passed the U.S. Military random vibration
Test Method 214. Test Condition II, Letter J of MIL-STD-202. This test consists of applying parts to a bundle and then vibrating them with
random vibration for 8 hours in each of two mutually perpendicular directions. The parts are then subjected to further temperature testing
and finally have to pass the minimum loop tensile strength test.
Panduit
®
Pan-Steel
®
Extra Heavy, Super Heavy, MSW50 Strapping and MSW63 Strapping have passed the U.S. Military Shock and
Vibration Testing per MIL-STD-167 and MIL-S-901D. The ties were subjected to vibrations in all three planes from 4 – 50 Hz and Shock
testing in all three planes utilizing a hammer shock machine.
SALT SPRAY: Panduit
®
Pan-Steel
®
Stainless Steel Ties and Straps have been subjected to salt spray tests without signs of corrosion
or reduction in performance.
OUTDOOR EXPOSURE: Panduit
®
Pan-Steel
®
Stainless Steel Ties and Straps have been exposed outdoors at New Lenox, Illinois USA
since 1985. At the printing of this catalog, there has been no sign of corrosion or loss of performance.
FLUID IMMERSION: Panduit
®
Pan-Steel
®
Stainless Steel Ties were immersed in: 1-Hydraulic Fluid, 2-Turbine Fuel, 3-Lubricating Oil,
and 4-Isopropyl Alcohol for four hours at temperatures of 122°F (50°C). Per SAE Standard AS23190, the parts were then subjected to
and passed the minimum loop tensile test.
RADIATION: Installed cable ties of various materials have been exposed to different amounts of radiation to determine the maximum
acceptable limit. These tests were conducted by Panduit to determine the acceptability for use in various areas of nuclear power plants
(accumulated over 40 year life). Radiation resistance is 2x10
8
rads.
Rigorous Tests and Physical Properties of Stainless Steel
STRENGTH: Panduit
®
Pan-Steel
®
Stainless Steel Ties and Straps are tested per the SAE Standard AS23190
formerly U.S. Military Specification MIL-S-23190, minimum loop tensile test. This test consists of applying a tie to a
split mandrel and then measuring the force required to separate the (two) halves until the tie fails. These minimum
loop tensile strengths are given for the various products on pages B3.5 through B3.25.
TEMPERATURE EXTREMES: Panduit
®
Pan-Steel
®
Stainless Steel Ties and Straps are 100% stainless steel in the
alloy provided (locking head, locking ball, and body all provided from the same grade of material ordered).
Various temperature tests have been successfully completed. One such test is the U.S. Military Temperature
Cycling Test per Thermal Shock Method 107, Test Condition B of MIL-STD-202. This test exposes the parts from
low temperature -85°F (-65°C) to high temperature 275°F (135°C) to low temperature -85°F (-65°C). After exposure,
the parts must be free of cracks, distortions, breaks, release of locking device; and meet the minimum loop
tensile requirements.
Military Cross Reference (AS23190)
Military Standard
Part Number
Panduit
Part Number
AS23190/3-1 MLT2S-CP
AS23190/3-1 MLT2S-CP316
AS23190/3-2 MLT4S-CP
AS23190/3-2 MLT4S-CP316
AS23190/3-3 MLT6S-CP
AS23190/3-3 MLT6S-CP316
AS23190/3-4 MLT8S-CP
AS23190/3-4 MLT8S-CP316
AS23190/3-5 MLT2H-LP
AS23190/3-5 MLT2H-LP316
AS23190/3-6 MLT4H-LP
AS23190/3-6 MLT4H-LP316
AS23190/3-7 MLT6H-LP
AS23190/3-7 MLT6H-LP316
AS23190/3-8 MLT8H-LP
AS23190/3-8 MLT8H-LP316
AS23190/3-9 MLT10H-LP
AS23190/3-9 MLT10H-LP316