Information

ELECTRICAL SOLUTIONS
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
C2.8
Pan-Way
®
TG-70 Raceway Accessories
• TG-70 accessories consist of device mounting brackets, standard faceplate brackets for data, wire retainers and fiber spool brackets;
the three-sided hanging box is used to mount NEMA standard single gang outlet and communications devices
Part Number Part Description Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
T70DB-X
Device mounting bracket. Used to mount NEMA
standard single gang electrical outlets and
communication devices with either screw-on or snap-on
single gang faceplates. Can be used with T-70, Twin-70,
and TG-70 raceway.
Gray 10 —
T70SDB-X
Standard faceplate bracket. Used to mount NEMA
standard 70mm single gang screw-on faceplates. Can
be used with T-70, Twin-70, TG-70 raceway and
Pan-Pole
™
Communication Pole.
Gray 10 —
TG70HB3-X
3-sided hanging box. Mounts standard electrical outlets
or communication devices with either NEMA standard
single gang screw-on or Panduit snap-on faceplates.
When used with TGDW divider wall, box separates and
fully encloses device to provide cabling separation.
Gray 10 —
TG70HB3GFCI-X
GFCI 3-sided hanging box. Accepts single gang U.S.
GFCI (ground fault circuit interrupter) standard
electrical devices. Provides increased internal area for
connections and excess wire.
Gray 10 —
TG70WR-X
Wire retainer. Holds wires in place during installation. Gray 10 100
TGFSB
Fiber spool bracket. Each piece consists of two halves
that snap into base of TG raceway. Provides method to
contain one meter or more of fiber slack and acts as a
strain relief while maintaining a minimum 32mm bend
radius. Bracket separation can be adjusted to fit the
length of slack required.
Gray 1 10
T70DB-X T70SDB-X
TG70HB3-X TG70HB3GFCI-X
TG70WR-X TGFSB
TGFSB installed in TG-70 raceway