Information

ELECTRICAL SOLUTIONS
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
C2.22
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
T70DB-X
T70SDB-X
T70HB-X
T70HB3-X
T70HB3GFCI-X
T70WR-X
T70FSB
T70S-X
Use the T70FSB with T-70 or Twin-70 raceway to
contain 1m or more of fiber slack while
maintaining a 30mm cable bend radius. Brackets
are adjustable for slack length.
Use T70S-X spacer plate for mounting
the CBX4 surface mount box on T-70
or T702.
Pan-Way
®
T-70 and Twin-70 Raceway Accessories
• T-70 and Twin-70 raceway accessories consist of device mounting brackets, snap-on device brackets, hanging boxes and 3-sided hanging
boxes used to mount NEMA standard single gang electrical outlets and/or communication devices
Part Number Part Description Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
T70DB-X
Device mounting bracket. Used to mount NEMA
standard single gang electrical outlets and
communication devices with either screw-on or
snap-on single gang faceplates. Can be used with
T-70, Twin-70, and TG-70 raceway.
Gray 10 —
T70SDB-X
Standard faceplate bracket. Used to mount NEMA
standard 70mm single gang screw-on faceplates.
Can be used with T-70, Twin-70, TG-70 raceway and
Pan-Pole
™
Communication Pole.
Gray 10 —
T70HB-X
Hanging box. Used to mount NEMA standard single
gang electrical outlets and devices with either screw-on
or snap-on single gang faceplates when there are
communications cables in the raceway. For use in T-70
and Twin-70 raceway only.
Gray 10 —
T70HB3-X
3-sided hanging box. Used to mount NEMA standard
single gang electrical outlets and devices with either
screw-on or snap-on single gang faceplates when
there are communications cables in the raceway. Box is
low profile for increased channel capacity and does not
require breakout removal. For use with T-70 and
Twin-70 raceway only.
Gray 10 —
T70HB3GFCI-X
T70 GFCI 3-sided hanging box. Accepts single gang
U.S. GFCI (ground fault circuit interrupter) standard
electrical devices. Provides increased internal area for
connections and excess wire.
Gray 10 —
T70WR-X
Wire retainer. Holds wires in place during installation. Gray 10 100
T70S-X
Spacer plate. Used to mount the CBX4 surface mount
box onto the T70DB-X or T70HB-X/T70HB3-X.
—10—
T70FSB
Fiber spool bracket. Each piece consists of two halves
that snap into base of T-70 or Twin-70 raceway.
Provides method to contain one meter or more of fiber
slack and acts as a strain relief while maintaining a
minimum 30mm bend radius. Bracket separation can
be adjusted to fit the length of slack required.
Gray 1 10