Information
For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
ELECTRICAL SOLUTIONS
D1.135
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
Metric Disco
™
Female Disconnects, Vinyl Barrel Insulated –
Funnel Entry
• Continuously molded design provides reliable, consistent
performance through the applicator for a high quality termination
every time
• Disconnect can be inserted and removed from the male tab without
the use of tools for lower installed cost
• Internal barrel serrations assure good wire contact and maximum
tensile strength
• Internal wire stop assures proper length of insertion into terminal
barrel, providing a higher quality connection
• UL Flammability UL 94V-0, maximum insulation temperature
221°F (105°C)
• UL and CSA rated up to 600 V per UL 310
*Not UL Listed or CSA Certified.
For applicator information, see page D1.143.
L
W
H
Metric DiscoGrip
™
Female Disconnects, Fully Insulated –
Funnel Entry
• Continuously molded design provides reliable, consistent
performance through the applicator for a high quality termination
every time
• Disconnect can be inserted and removed from the male tab
without the use of tools for lower installed cost
• Premium nylon insulation retains its shape when crimped and
provides a tight grip around the wire insulation for maximum
strain relief
• Fully insulated design provides protection from electrical shorts
• Internal wire stop assures proper length of insertion into terminal
barrel, providing a higher quality connection
• Male tab couples with (all 6.3mm x 0.8mm) female disconnects
• UL Flammability UL 94V-2, maximum insulation temperature
221°F (105°C)
• UL and CSA rated up to 600 V per UL 310
*Also approved for use with (2) 1.5 (#16) wires.
For applicator information, see page D1.143.
W
L
H
Type DMV-B
Type DMPF-FIB
Cross section of DiscoGrip
™
Crimp showing
insulation crimp of the wire insulation.
Part Number
Wire
Range
(mm
2
)
Color
Code
Max.
Ins.
(mm)
Figure Dimension
(mm)
Tab
Size
(mm)
CA9
Series
Crimp Die
CA-800/EZ
Series
Crimp Die
Pieces
Per
Reel
L W H
DMV1-485B-3K
0.5 – 1.0 Red
4.06 19.3 5.8 2.5 4.8 x 0.5 CD9-1A CD-800-1 3000
DMV1-488B-3K
4.06 18.8 5.8 2.5 4.8 x 0.8 CD9-2A CD-800-2 3000
DMV1-63B-3K
4.06 21.1 7.4 3.0 6.3 x 0.8 CD9-2A CD-800-2 3000
DMV2-485B-3K
1.5 – 2.5 Blue
4.52 19.6 5.3 2.5 4.8 x 0.5 CD9-2A CD-800-2 3000
DMV2-488B-3K
4.52 19.6 5.3 2.5 4.8 x 0.8 CD9-1A CD-800-1 3000
DMV2-63B-3K
4.52 21.1 7.4 3.0 6.3 x 0.8 CD9-2A CD-800-2 3000
DMV6-63-2K*
4.0 – 6.0 Yellow
5.84 24.1 7.4 3.0 6.3 x 0.8 CD9-3B CD-800-8 2000
Part Number
Wire
Range
(mm
2
)
Color
Code
Max.
Ins.
(mm)
Figure Dimensions
(mm)
Tab
Size
(mm)
CA9
Series
Crimp Die
CA-800/EZ
Series
Crimp Die
Pieces
Per
Reel
L W H
DMPF1-285FIB-3K
0.5 – 1.0 Red
3.4 18.0 4.8 4.3 2.8 x 0.5 CD9-12A CD-800-12 3000
DMPF1-288FIB-3K
3.4
18.0 4.8 4.3 2.8 x 0.8 CD9-12A CD-800-12 3000
DMPF1-485FIB-3K
3.4
19.8 7.9 4.3 4.8 x 0.5 CD9-10A CD-800-10 3000
DMPF1-488FIB-3K
3.4
19.8 7.9 4.3 4.8 x 0.8 CD9-10A CD-800-10 3000
DMPF1-63FIB-3K
3.4
21.3 8.9 5.6 6.3 x 0.8 CD9-13A CD-800-13 3000
DMPF2-485FIB-3K
1.5 – 2.5 Blue
4.0 19.8 7.9 4.8 4.8 x 0.5 CD9-11A CD-800-11 3000
DMPF2-488FIB-3K
4.0
19.8 7.9 4.8 4.8 x 0.8 CD9-11A CD-800-11 3000
DMPF2-63FIB-3K
4.0
21.3 8.9 5.6 6.3 x 0.8 CD9-11A CD-800-11 3000
DMPF6-63FIB-2K*
4.0 – 6.0 Yellow 5.5 24.4 8.9 5.8 6.3 x 0.8 CD9-13A CD-800-13 2000