Information

For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
ELECTRICAL SOLUTIONS
D1.143
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
Reel Smart
™
Ferrule Applicator – CA10
• Designed for use with continuously molded ferrules in reels of
3,000 or 5,000 for high volume applications
• Precision ferrule indexing through applicator for optimum reliability
and productivity
• Universal base plate allows compatibility with the Panduit
CP-871 electric press, and other commercially available bench
presses and automatic wire processing (AWP) machines
• Quick change die sets terminate the entire ferrule line to provide
fast product change over and reduction in setup time; dies
sold separately
CA9 Ezair
™
and CA-800EZ Applicators
• Designed to terminated all continuously molded terminals,
disconnects, and splices in reels of 3,000 or 5,000 for high
volume applications
• Precision terminal indexing through applicator for optimum
reliability and productivity
• Universal base plate allows compatibility with the Panduit
CP-871 electric press, and other commercially available bench
presses and automatic wire processing (AWP) machines
• Quick change die sets allow for fast product change over and
reduction in setup time; dies sold separately
*AMP is a registered trademark of Tyco Electronics.
For crimp die information, refer to pages D1.145 and D1.146.
Part Number Part Description
Std.
Pkg.
Qty.
CA-800EZ*
Applicator: runs in the AMP* Model T and K bench presses. True “quick change”
applicator — no additional plates are necessary. Slide right into the press for easy
changeover. Uses CD-800 series die inserts.
1
CA9
CA9 Ezair
™
Applicator: terminates the entire Reel Smart
™
product line. This greatly
reduces set up and maintenance time and increases productivity. This patented
applicator is so smart it automatically adjusts feed stroke to the correct pitch and
length for the entire product line. Crimp die changeover in less than 1 minute,
minimizes downtime and increases productivity. Fast, easy loading of terminal parts
without special instructions or setup personnel. Simply feed the parts strip into the
applicator. All the necessary adjustments are made by the dies and the automatic
feed stroke.
Used in CP-871 electric press.
Safety lockout guard ensures operator safety.
Positive stop adjustment rings allow for electrical and insulation crimp
adjustments as desired.
1
Part Number Part Description
Std.
Pkg.
Qty.
CA10
Applicator used to terminates entire line of Reel Smart
™
Continuously Molded Ferrules
on reels. For use with CP-871 Electric Press and CD10 series die sets.
1
CD10-1
Die insert to be used with the CA10 applicator to terminate FS75, FSD75, FS76 and
FSD76 Reel Smart
™
Continuously Molded Ferrules.
1
CD10-2
Die insert to be used with the CA10 applicator to terminate FS77, FSD77, FS78 and
FSD78 Reel Smart
™
Continuously Molded Ferrules.
1
CD10-3
Die insert to be used with the CA10 applicator to terminate FS80 and FSD80
Reel Smart
™
Continuously Molded Ferrules.
1