Information

ELECTRICAL SOLUTIONS
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
D1.148
Applicable Pan-Term
®
products meet or
exceed the following test specifications:
• UL 486A (Terminals)
• UL 486C (Splices)
• UL 310 (Blade Adapters)
• CSA C22.2 No. 65 (all designs)
• UL and CSA approved products are shown with the
applicable logos in the product section.
• UL file #E52164, CSA File #LR31212
Applicable Reel Smart
™
products meet or exceed the
following test specifications:
• Listed per Underwriters Laboratories, Inc. Standard
UL 310 (Disconnects)
• Recognized under the Component Recognition Program
of Underwriters Laboratories Inc.
• Certified by Canadian Standards
Association (Disconnects)
• UL and CSA listed products are shown with the
applicable logos in the product section.
• UL file #E78526, CSA file #LR31212
Performance Requirements
Wire Size (AWG)
#26 #24 #22 #20 #18 #16 #14 #12 #10
UL 486A (Terminals), UL 310 (Male Blade Adapters)
Test current for max. 50°
rise (amps)
3.5 7 9 12 17 18 30 35 50
Min. tensile strength* (lbs.) 3 5 8 13 20 30 50 70 80
UL 486C (Splices)
Test current for max. 50°C
rise (amps)
5.5 7 9 12 17 18 30 35 50
Min. tensile strength* (lbs.) 3 5 8 10 10 15 25 35 40
*Pull-out force of the crimped terminal.
Wire Size (AWG)
#22 #20 #18 #16 #14 #12 #10
UL 310 (Disconnects)
Continuous test current for max.
30°C rise (amps)
(for .187", .205", .250" tab widths)
3 4 7 10 15 20 24
Continuous test current for max.
30°C rise (amps)
(for .110" tab width)
2345
Not Applicable
Min. tensile strength* (lbs.) 8 13 20 30 50 70 80
*Pull-out force of the crimped disconnect.
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification