Information

For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
ELECTRICAL SOLUTIONS
D2.155
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
Belleville Compression Washers
Part Number
Stud Hole Size
(In.)
Figure Dimensions
(In.)
Std.
Pkg.
Qty.
D H T
CW-14-L
1/4 0.68 0.09 0.05 50
CW-56-L
5/16 0.81 0.08 0.06 50
CW-38-L
3/8 0.93 0.10 0.07 50
CW-12-Q
1/2 1.18 0.12 0.09 25
CW-58-Q
5/8 1.49 0.15 0.12 25
For Use with Aluminum Connectors
• Conical spring washer for use when assembling aluminum
connectors to copper and/or steel pads, compensates for
differing rates of thermal expansion to keep hardware
assembly from loosening
• For assembly information, see page D2.158
• Made from hardened steel to provide high strength
• Cadmium-plated to inhibit corrosion
Type CW
D
T
H
• Oxide inhibitor for compression conductor connections lowers
electrical resistance of compression joint while sealing out air
and moisture to prevent the formation of surface oxides
• Wide operating temperature range; can be used in a wide
range of electrical and environmental conditions
• Packaged in convenient dispenser bottles
Type CMP
Part Number Description
Std.
Pkg.
Qty.
CMP-100-1
Contact aid for pad-to-pad or thread-to-thread aluminum connections, 8 oz. Operating
temperature range -60°F (-51°C) to 400°F (204°C).
1
Joint Compounds