Instruction Manual

© Panduit Corp. 2017
OPERATION MANUAL
CT-902HP
FAMILY
Page: 4 of 6
SYSTEM SPECIFICATIONS
CT-902HP Family Hydraulic Pump pressure is factory preset at 10,000 PSI ± 200 PSI (700 bar),
Hydraulic Pumps and is to be used with the following Remote Hydraulic Crimp Heads: CT-920CH,
CT-920CH/CCP, CT-930CH, CT-940CH and Dieless CT-980CH. Pump shuts off when
cycle is complete. Will not release until down button is activated.
Dimensions: 9.5 L x 10.5 W x 15.5 H in.
241 L x 267 W x 393 H (mm)
Weight: 15.4 (kg) / 34.0 lbs.
Housing: Color – TOP BASE
110V Blue Black
220V Yellow White/Gray
Pump
Tank Capacity: 2 Liters
Fluid Type: Shell Tellus Hydraulic Oil S2 V 15
Motor
110V
220V
Type:
Commutator
Commutator
R.P.M.:
1200
1200
Voltage:
110 V
220 V
Watts:
715 W
340 W
Frequency:
50/60 Hz
50/60 Hz
Current:
6.5 A
3.2 A
Horsepower:
½
½
Delivery @ 200 psi 157 cubic inches/minute
Delivery @ 10,000 psi 19 cubic inches/minute
CT-902HPRCH Hydraulic Pump with Remote Control Handle (hardwired at factory)
RCH Dimensions: 155 L x 167 H x 34 W (mm)
6.1 L x 6.6 H x 1.4 W in.
Weight: 3.0 (kg) / 6.6 lbs.
CT-902HPRFS Hydraulic Pump with Remote Foot Switch (hardwired at factory)
RFS Dimensions: 243 L x 173 H x 180 W (mm)
9.6 L x 6.8 H x 7.1 W in.
Weight: 3.5 (kg) / 7.7 lbs.
OPTIONAL ACCESSORIES
CD-920 / CD-940 Refer to product packaging for wire size and crimp designations; or contact
Compression Dies Panduit Customer Service for specific die application information.
CT-900HPH Electrically non-conductive 10 ft. hose. Supplied pre-filled with hydraulic fluid
Hydraulic Pump Hose for fast start up.
PG-1 Verifies the PSI reading of the CT-902HP Hydraulic Pump.
Pressure Gauge Dimensions: 228 L x 114 H x 38 W (64 dial face) (mm)
9.0 L x 4.5 H x 1.5 W (2.5 dial face) in.
Weight: 1.4 (kg) / 3.0 lbs.
CT-902HPRFS Pump Shown