Installation Manual

ManualsBrandsPanduit ManualsConduit2 CWD, PVC, 3.35x2.57, LG, 6ft

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

RW207

- or -

Option 1 - Panduct Corner Wiring Duct Mounting Clip

Note: Clips provide a permanent installation and are not intended to allow for product removal

Panduct PanelMax One-Piece Corner Wiring Duct

For use with Panduit Panduct Types

F, G, FS and D Wiring Duct

Part Numbers: CWD2**6, CWD3**6, CWD4**6, C2**6, CDCLP2, CDCLP3,

CDCLP4, CDLB3, CDLB4

CDCLP2, CDCLP3,

CDCLP4

(sold separately)

CWD2**6

CWD3**6

-or-

CWD4**6

Note: #10-32 x 1/2" (or sheet metal

screw equivalent) to be supplied by

the installer/end user

Refer to chart on page 4 for

mounting hole locations

Mounting clips must

be installed level

Wiring Duct

Mounting

Clip

C2**6

(sold separately)

Page 1 of 4

** Denotes color.

Summary of content (4 pages)

PAGE 1
Panduct PanelMax One-Piece Corner Wiring Duct For use with Panduit Panduct Types F, G, FS and D Wiring Duct Part Numbers: CWD2**6, CWD3**6, CWD4**6, C2**6, CDCLP2, CDCLP3, CDCLP4, CDLB3, CDLB4 INSTALLATION INSTRUCTIONS © Panduit Corp.
PAGE 2
INSTALLATION INSTRUCTIONS © Panduit Corp. 2012 Option 2 - Panduct Nylon Rivets or Standard Fasteners 1 Refer to chart on page 4 for mounting hole locations - or - NR1-C (sold separately) Note: #10-32 x 1/2" (or sheet metal screw equivalent) to be supplied by the installer/end user 2 3 CWD2**6 CWD3**6 -orCWD4**6 NR1-C (Install on both sides of duct) TNR (sold separately) 4 C2**6 (sold separately) For Technical Support: www.panduit.com/resources/install_maintain.
PAGE 3
INSTALLATION INSTRUCTIONS © Panduit Corp. 2012 RW207 Option 3 - Panduct Corner Wiring Duct L-Bracket Mounting Note: For use in vertical applications only when no side panel is present. - or Note: #10-32 x 1/2" (or sheet metal screw equivalent) to be supplied by the installer/end user CDLB3, CDLB4 (sold separately) Corner Duct L-Bracket “C” minimum clearance to side wall “D” minimum distance to edge of back panel CDLB3 2.03" (51.6) 0.68" (17.4) CDLB4 2.96" (75.2) 0.68" (17.
PAGE 4
INSTALLATION INSTRUCTIONS © Panduit Corp. 2012 RW207 Optional Feature - Panduct Solid/Slotted Divider Wall CWD2**6 CWD3**6 -orCWD4**6 D4H6, SD4H6 (sold separately) - or - Mounting Hole Locations for CDCLP or Standard Fasteners (Options 1 and 2) “X” “X” Dimension “X ” Corner Duct CDCLP Screws, Fasteners, or NR1-C CWD2**6 1.60" (1 19 32 ") 2.95" (2 15 16 ") CWD3**6 1.91" (1 29 32 ") 3.88" (3 7 8 ") CWD4**6 2.84" (2 27 32 ") 4.