Cut Sheet
For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
ELECTRICAL SOLUTIONS
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
T
erminals
D2.
Pow
er
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
Disco-Lok
™
Female Disconnects, Nylon Fully Insulated – Funnel Entry
• Continuously molded design provides reliable, consistent
performance through the applicator for a high quality termination
every time
• Disconnect can be inserted and removed from the male tab
without the use of tools for lower installed cost
• Unique locking mechanism design allows for low insertion forces
(mating) and positive lock for high vibration applications where a
secure connection is mandatory
• Fully insulated design provides protection from electrical shorts
• Flared barrel extension integrated into stamping to provide
insulation grip for double crimp requirements
• Insulation housing moves back and forth to engage and disengage
locking mechanism for repeated use
• Specialty tool required to install this disconnect (CT-1014)
• Mates with DNF-FIMB family
• UL Flammability UL 94V-2/HB, maximum insulation temperature
221°F (105°C)
• Rated up to 300 V
Female Disconnects, Nylon Fully Insulated – Funnel Entry
• Continuously molded design provides reliable, consistent
performance through the applicator for a high quality termination
every time
• Disconnect can be inserted and removed from the male tab without
the use of tools for lower installed cost
• Fully insulated design provides protection from electrical shorts
• Disconnects available in common industry tab sizes
• Internal wire stop assures proper length of insertion into terminal
barrel, providing a higher quality connection
• UL Flammability UL 94V-2/HB, maximum insulation temperature
221°F (105°C)
• UL and CSA rated up to 600 V per UL 310
*UL/CSA standards do not exist for 0.110" x 0.010" receptacles.
**UL with 17 AWG wire.
‡Compressor tab disconnect to fit 0.250" tabs with a post style support.
For applicator information, see page D1.143.
W
H
L
W
H
L
Type DNG-FL
Type DNF-FIB
For applicator information, see page D1.143.
Part Number
Wire
Range
Color
Code
Max.
Ins.
(In.)
Figure Dimensions
(In.)
Tab
Size
CA9
Series
Crimp Die
CA-800/EZ
Series
Crimp Die
Pieces
Per
Reel
L W H In. mm
DNG18-250FL-3K
22 – 18
AWG
Red 0.126 0.97 0.36 0.24 0.250 x
0.032
6.3 x 0.8 CD9-14A CD-800-14 3000
DNG14-250FL-3K
16 – 14
AWG
Blue 0.150 0.97 0.36 0.25 0.250 x
0.032
6.3 x 0.8 CD9-14A CD-800-14 3000
Part Number
Wire
Range
Color
Code
Max.
Ins.
(In.)
Figure Dimensions
(In.)
Tab
Size
CA9
Series
Crimp Die
CA-800/EZ
Series
Crimp Die
Pieces
Per
Reel
L W H In. mm
DNF18-110FIB-3K
22 – 18
AWG
Red 0.120 0.71 0.19 0.15 0.110 x 0.032 2.8 x 0.8 CD9-7A CD-800-7 3000
DNF18-111FIB-3K
Red 0.120 0.71 0.19 0.15 0.110 x 0.020 2.8 x 0.5 CD9-7A CD-800-7 3000
DNF18-112FIB-3K*
Natural 0.120 0.71 0.19 0.15 0.110 x 0.010 2.8 x 0.3 CD9-7A CD-800-7 3000
DNF18-187FIB-3K
Red 0.136 0.78 0.29 0.16 0.187 x 0.032 4.8 x 0.8 CD9-4A CD-800-4 3000
DNF18-188FIB-3K
Red 0.136 0.78 0.29 0.16 0.187 x 0.020 4.8 x 0.5 CD9-4A CD-800-4 3000
DNF18-205FIB-3K
Red 0.136 0.78 0.31 0.22 0.187/0.205 x 0.032 4.8/5.2 x 0.8 CD9-4A CD-800-4 3000
DNF18-206FIB-3K
Red 0.136 0.78 0.31 0.22 0.187/0.205 x 0.020 4.8/5.2 x 0.5 CD9-4A CD-800-4 3000
DNF18-250FIB-3K**
Red 0.136 0.84 0.35 0.22 0.250 x 0.032 6.3 x 0.8 CD9-4A CD-800-4 3000
DNF14-187FIB-3K
16 – 14
AWG
Blue
0.160 0.78 0.29 0.18 0.187 x 0.032 4.8 x 0.8 CD9-5A CD-800-5 3000
DNF14-188FIB-3K
0.160 0.78 0.29 0.18 0.187 x 0.020 4.8 x 0.5 CD9-5A CD-800-5 3000
DNF14-205FIB-3K
0.160 0.78 0.31 0.22 0.187/0.205 x 0.032 4.8/5.2 x 0.8 CD9-5A CD-800-5 3000
DNF14-206FIB-3K
0.160 0.78 0.31 0.22 0.187/0.205 x 0.020 4.8/5.2 x 0.5 CD9-5A CD-800-5 3000
DNF14-250FIB-3K
0.160 0.84 0.35 0.22 0.250 x 0.032 6.3 x 0.8 CD9-5A CD-800-5 3000
DNF10-250FIB-2K
12 – 10
AWG
Yellow
0.220 0.96 0.35 0.23 0.250 x 0.032 6.3 x 0.8 CD9-13B CD-800-13 2000
DNF10250FIBC-2K‡
0.220 0.96 0.35 0.23 0.250 x 0.032 6.4 x 0.8 CD9-13B CD-800-13 2000