Cut Sheet
For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
ELECTRICAL SOLUTIONS
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
T
erminals
D2.
Pow
er
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
Heat Shrink Disconnects, Fully Insulated – Funnel Entry
• Disconnect can be inserted and removed from the male tab
without the use of tools for lower installed cost
• Fully insulated design provides protection from electrical shorts
• Heat shrink sleeving forms a protective barrier to provide
environmentally sealed terminations ideal for high
moisture applications
• Heat shrink sleeving provides additional level of strain relief
for the wire
• Minimum continuous operating temperature -65°F (-55°C)
• Maximum continuous operation temperature 230°F (110°C)
• Shrink temperature 300°F (150°C)
• Rated up to 600 V
Type DNH
H
L
W
Female Disconnect, Nylon Barrel Insulated – Funnel Entry
• Disconnect can be inserted and removed from the male tab
without the use of tools for lower installed cost
• Metal insulation grip sleeve crimps to wire insulation, providing
protection to the crimp joint during high vibration applications
• Internal barrel serrations assure good wire contact and maximum
tensile strength
• Internal wire stop assures proper length of insertion into terminal
barrel, providing a higher quality connection
• UL Flammability UL 94V-2/HB, maximum insulation temperature
194°F (90°C)
• UL and CSA rated up to 300 V per UL 310
*Not UL Listed or CSA Certified.
**Bulk packaging may be available, contact Panduit Customer Service for additional information.
‡UL and CSA approved tooling/product combinations. For crimping tool information, see pages D1.84, D1.86,
and D1.88.
Type DNF
H
W
L
For crimping tool information, see page D1.85.
Part Number
Wire
Range
Color
Code
Max.
Ins
(In.)
Figure Dimensions
(In.)
Tab
Size
(In.)
Recommended
Installation
Tool
Std.
Pkg.
Qty.**
Std.
Ctn.
Qty.
L W H
DNF18-110-C
22 – 18
AWG
Red
0.100 0.69 0.15 0.08 0.110 x 0.032
CT-600-A‡,
CT-1525‡,
CT-2500‡
100 500
DNF18-111-C
0.100 0.69 0.15 0.07 0.110 x 0.020 100 500
DNF18-187-C
0.137 0.76 0.23 0.10 0.187 x 0.032
CT-600-A‡,
CT-1550,
CT-1551,
CT-2500
100 500
DNF18-188-C
0.137 0.76 0.23 0.10 0.187 x 0.020 100 500
DNF18-205-C
0.137 0.76 0.25 0.12 0.205/0.187 x
0.032
100 500
DNF18-206-C
0.137 0.76 0.25 0.12 0.205/0.187 x
0.020
100 500
DNF18-250-C
0.138 0.81 0.29 0.12 0.250 x 0.032 100 500
DNF14-110-C*
16 – 14
AWG
Blue
0.162 0.75 0.15 0.08 0.110 x 0.032
CT-1525,
CT-2500
100 500
DNF14-111-C*
0.162 0.75 0.15 0.07 0.110 x 0.020 100 500
DNF14-187-C
0.162 0.76 0.23 0.10 0.187 x 0.032
CT-600-A‡,
CT-1550,
CT-1551,
CT-2500
100 500
DNF14-188-C
0.162 0.76 0.23 0.10 0.187 x 0.020 100 500
DNF14-205-C
0.162 0.76 0.25 0.12 0.205/0.187 x
0.032
100 500
DNF14-206-C
0.162 0.76 0.25 0.12 0.205/0.187 x
0.020
100 500
DNF14-250-C
0.162 0.83 0.29 0.12 0.250 x 0.032 100 500
Part Number
Wire
Range
Color
Code
Max.
Ins.
(In.)
Figure Dimensions
(In.)
Type
Tab
Size
(In.)
Recommended
Installation
Tool
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
L W H
DNH18-250FIM-Q
22 – 18
AWG
Red
0.133 1.50 0.41 0.31 Male
0.250
x
0.032
CT-310
25 125
DNH18-250FIB-Q
0.132 1.44 0.35 0.22 Female 25 125
DNH14-250FIM-Q
16 – 14
AWG
Blue
0.158 1.50 0.41 0.31 Male 25 125
DNH14-250FIB-Q
0.156 1.44 0.35 0.22 Female 25 125
DNH10-250FI-E
12 – 10
AWG
Yellow 0.230 1.44 0.35 0.27 Female 20 100