Network Device User's Guide DPOE24U1X, DPOE24U1XY, DPOE12U1X, DPOE12U1XY, DPOE24S1X, DPOE24S1XY

PANDUIT® DPoE™ Power Patch Panel User’s Guide Issue 2.2
Part Number: PN378A
43
− Clear Log
By clicking on the Clear Log button, the operator will be given the opportunity to
export the log before erasing the entire log.
NOTE:
Clearing the log will clear the entire message log in the EM. It
cannot be used to selectively clear a portion of the log.
Refresh the Network
The
Refresh option under the Devices pull-down menu or the button ( ) on the top tool bar provides an
easy mechanism to make sure that the configuration and status information in a deployed network of
DPoE™ Power Patch Panels is consistent with the EM. Changes in network status or configuration
changes made by a different EM operating within the same network of panels are two reasons why
panels may have different information than the EM.
The Refresh capability will allow a Refresh of the entire network, all the racks in a panel, or a single panel
within a rack.
Administering E-mail Settings
By using the E-mail mechanism, the network operator can assign specific e-mail addresses to be notified
of network events. For example, the EM can be configured to send e-mail messages to one or more e-
mail addresses in the event of configuration changes, incoming alarms or other events within the network
of
DPoE™ Power Patch Panels. There are 16 categories of messages, alarms and events, which can be
flexibly assigned to any of the e-mail addresses.
The
E-Mail Settings option under the Tools pull-down menu provides an easy mechanism to add new e-
mail addresses to the system or administer which events trigger messages to which e-mail accounts.
There is also a button (
) on the top tool bar on the system-level opening screen to perform this task.