Cut Sheet

www.panduit.com
Pan-Way
®
LD Surface Raceway System
SPECIFICATION SHEET
specifications
LD non-metallic series low voltage, one-piece hinged design,
single channel surface raceway shall include adhesive backing
and shall be made of impact resistant material with a smooth
finish that shall not scratch, peel or corrode. The raceway shall
include an assortment of bend radius and standard fittings that
complement the offering to help route, protect and conceal low
voltage data, voice and video cabling. LD raceway shall be
available in three sizes and four standard colors that shall be
optimized with the Panduit
®
Pan-Net
®
communication system.
applications
Pan-Way
®
LD Surface Raceways are
designed to provide easy and economical
solutions for routing any low voltage cable
along smooth and clean perimeter walls,
baseboards or ceilings. This raceway is a
perfect solution for schools, hospitals, offices,
homes or anywhere a small, secure, low
profile raceway is needed.
technical information
Material:
Rigid PVC
Flammability:
UL94V-0; FT4
Capacity:
Single Channel
Voltage Rating:
50V or less
Operating and
Storage Temperature:
0 to 50 C
key features and benefits
1" bend radius
control ttings:
Cables in the raceway will satisfy the minimum 1” bend radius
requirement, preventing the potential degradation of cable
performance; meets TIA/EIA standards
One-piece hinged design:
Cables can be laid into the raceway, speeding installation and
preventing damage to cables
Adhesive backing:
Full length adhesive strip allows easy tool free installation and
works well for temporary mounting
Available in different
sizes & lengths:
Accommodates varying cable types and capacities.
Available sizes - LD3, LD5,LD10 ;
Available lengths - 6’,8’,10’ (2m length available in Europe only)
Non-metallic
construction:
Lightweight, reducing installer fatigue and labor required to
install the raceway; solid color throughout will not chip, peel,
rust or corrode; easy to cut with standard saws and saw blades,
eliminating the need for special cutting devices
Distinct colors:
Available in four standard colors- IW,EI,IG,WH. AW available in
Europe only. Raceway is field paintable to match walls and
surrounding décor
Full selection of
ttings and surface
mount boxes:
Wide variety of fittings and surface mount boxes available for
various LD raceway applications
LD Raceway
Raceway: LD3IW**-A
LD5IW**-A
LD10IW**-A
LD Raceway Fittings
Coupler: CF*IW-E
Inside corner: ICFC*IW-X
Outside corner: OCFC*IW-X
Right angle: RAFC*IW-X
End cap: ECF*IW-X
Tee: TFC*IW-X
Four-way cross: CRFC5IW-X
Drop ceiling/
entrance end: DCF*IW-X
Right angle/
entrance end: RAEFXIW-X
LD5 to LD3
reducer: RF5X3IW-E
LD10 to LD5
reducer: RF10X5IW-X
LD10 to LD3
reducer: RF10X3IW-X
LD5 re box
adapter: FBA5IW-X
LD10 re box
adapter: FBA10IW-X
LD Raceway Installation
Installation tool: LDW*-V
LD Raceway Surface Mount
Outlet/Junction Boxes
Low Voltage:
Single gang,
one–piece : JB1IW-A
Single gang,
one-piece, deep: JB1DIW-A
Single gang,
two-piece : JBX3510IW-A
Single gang, two-piece,
fast snap: JB1FSIW-A
In-wall box adapter: JBA-X
Power rated:
Single gang,
two-piece: JBP1IW
Single gang,
two-piece, deep: JBP1DIW
Single gang,
two-piece, extension: JBP1EIW
Single gang, two-piece,
intermediate: JBP1IIW
Single gang, two-piece,
snap on: JBP1FSIW
Single gang,
two-piece, round: RJBX3510IW
Double gang,
two-piece: JBP2IW
Double gang,
two-piece, deep: JBP2DIW
Double gang,
two-piece, divided: JBP2SIW
Double gang,
two-piece, snap on: JBP2FSIW
* Insert raceway size of 3, 5, or 10
** Insert raceway length of 6’, 8’, or 10’
All parts listed in International White (IW) color.
To order other colors substitute Electrical Ivory
(EI), International Gray (IG), and White (WH).