SELECTION AND USE OF ADHESIVE BACKED MOUNTS AND DEVICES
PANDUIT offers high performance adhesive backed mounts and devices for a quick, dependable method of securing, routing and protecting wires or cables. The adhesive backing provides easy installation and is an alternative to mechanical fasteners. When properly installed, PANDUIT ® Adhesive Backed Mounts and devices offer the advantage of lower installed cost and high reliability.
Guideline for Adhesive The following chart should be used as a guideline for choosing the best adhesive for common surfaces and chemical resistance. Since each application has specific requirements, PANDUIT recommends that further testing be conducted to determine the suitability of the adhesive in a specific environment or application.
Proper Installation Steps Surface Preparation For best results, mounts should be applied to a clean, dry, and grease-free surface. It is recommended that for each individual application, a solvent or cleanser be used to thoroughly prepare the surface for mount installation. The following are recommended cleaning guidelines: Alcohol 1. For Rubber and Acrylic-based Adhesive Foam Tape, a mixture of water and isopropyl alcohol may be used on most surfaces.
Mount Spacing To determine the number of mounts to use in a given application, the following formula can be used as a guideline: Cable bundle weight in lbs/foot Maximum static load rating of the mount* = Minimum number of mounts per foot For example, to determine the mount spacing using part number ABM2S-A-C for an application with a bundle of wires that weigh one pound per foot, the formula would be: 1 pound per foot 0.5 lbs load rating = 2 mounts per foot * See pages 6-7 for static load ratings.
Adhesive Backed Mounts and Clips Part Number ABM ABMT Adhesive Type Std. Pkg. Qty.‡ 59 136 227 227 286 508 907 Rubber Rubber Rubber Rubber Rubber Rubber Rubber 100 100 100 100 100 50 50 .38 .38 174 174 Rubber Rubber 100 100 22.9 22.9 .45 .45 204 204 Rubber Rubber 25 25 1.00 25.4 1.00 454 Rubber 100 25.4 1.00 25.4 .50 227 Rubber 25 .63 1.00 1.25 16.0 25.4 31.7 .76 1.00 1.12 19.3 25.4 28.6 .20 .50 .70 91 227 318 Rubber Rubber Rubber 100 100 100 PVC PVC PVC PVC 1.00 1.
Adhesive Backed Mounts and Clips (continued) BEC Part Number Length In. mm Material Width In. mm Max. Static Load Lbs. g Adhesive Type Std. Pkg. Qty.‡ Bevel Entry Clips BEC38-A-L BEC62-A-L BEC75-A-L VCC Nylon 6.6 Nylon 6.6 Nylon 6.6 1.46 1.46 1.46 37.1 37.1 37.1 1.24 1.24 1.49 31.5 31.5 37.8 .91 .91 1.09 411 411 493 Rubber Rubber Rubber 50 50 50 Nylon 6.6 1.00 25.4 .50 12.7 .25 113 Rubber 100 .75 1.01 1.51 19.0 25.7 37.9 .75 1.00 1.00 19.0 25.4 25.4 .28 .50 .
PANDUIT ® Corp. Tinley Park, Illinois 60477-3091 For more information or to request a catalog 800-777-3300 cs@panduit.com www.panduit.com PANDUIT ® Europe Ltd. London, UK Phone: 44.208.601.7200 PANDUIT ® Japan Tokyo, Japan Phone: 81.3.3767.7011 PANDUIT ® Asia Pacific Pte. Ltd. Republic of Singapore Phone: 65.6379.6700 PANDUIT ® Latin America Jalisco, Mexico Phone: 52.333.666.2501 PANDUIT ® Australia Pty. Ltd. Victoria, Australia Phone: 61.3.9794.9020 PANDUIT ® Canada Markham, Ontario Phone: 800.777.