Brochure

3
Guideline for Adhesive
The following chart should be used as a guideline for choosing
the best adhesive for common surfaces and chemical resistance.
Since each application has specific requirements,
PANDUIT
recommends that further testing be conducted to determine the
suitability of the adhesive in a specific environment or application.
1. Not recommended for use on copper or brass.
2. Mounts manufactured from outdoor material only. For specific applications, individual testing prior to extensive use is suggested.
3. Depends on concentration, exposure time and chemical composition.
Surfaces
Plastics Good Good Good
Wood Good Good Good
Glass Fair Good Good
Painted Surfaces Good Good Fair
Powder Coating Good Fair Good
Metal Good
1
Good
1
Good
Paper Good Good Fair
Concrete, Stone, Masonry Not Recommended Not Recommended Good
Chemical Resistance
Water Good Poor Poor
Oil Poor Fair
3
Good
Gasoline Poor Fair
3
Fair
Dilute Acids Poor Fair
3
Fair
Dilute Alkalis Good Fair
3
Fair
Organic Solvents Poor Fair
3
Not Recommended
Outdoor Exposure Not Recommended Good
2
Good
2
Rubber Based Foam
Tape Mounts
Acrylic Based Foam
Tape Mounts
Epoxy Applied
Adhesive Mounts