Installation Manual

For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2015
FS006D
Page 2 of 11
Figure 2
Mounting brackets
Figure 3
Determine where the cable will enter the enclosure.
Carefully remove the knock-out so as not to damage the
surrounding sheet metal.
DO NOT Install grommet at this stage. Grommet will be
installed after the enclosure is mounted to the rack.
Use (2) #12-24 X 1/2"
screws (provided).
Repeat for other side.
Mount the enclosure to the rack using
(4) #12-24 x 12" screws.
Use (4) M6 x 1 screws if mounting to a metric rack.
Preparation and Rack Mounting
Place the mounting brackets at the desired position
on the rack.
Figure 4