Installation Manual

For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2015
FS006D
Page 5 of 11
Route fiber through grommet to fiber cassettes as
shown. Leave enough slack so when the drawer is
fully extended the cables are not put under tension.
DO NOT use so much slack that the drawer cannot
be returned to its home position. (See Figure 7D)
Use Tak-Tys to secure fiber cords at cable entry
location and other points as shown.
Drawer in extended position
Free floating
Tak-Ty
Adhesive bevel
entry clips
(Note location
and position of
clips)
Drawer in home position
Grommet
Fixed
Tak-Ty
Tak-Ty cables to fence
Cable length
between point “A”
and point “B” is
approx. 34"
[.864m].
“A”
“B”
Figure 7C
Figure 7D
Note: Cover not shown for clarity.
Note: Cover not shown for clarity.