Installation Manual

For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2011
FS004A
Mounting
6mm or #12-24 x 1/2" screws provided
(4 places)
Drawer Opening and Removal
Release latches
Grommet, Gland, and Spool Installation
Rubber Grommet
PG11 Gland
Remove knockouts and insert grommets and/or glands as shown
above.
Remove the liner from the tape underneath each fiber
management spool. Place the fiber management spools
inside the enclosure as shown above.
Note: Do not install spools if splicing with Fiber Optic Splice
Module (FOSM).
Spool
Slide drawer forward Rotate up and remove
Page 2 of 4
Mount the enclosure to rack using four (4) 6mm or #12-24 x 1/2" screws provided.