Cut Sheet
SPECIFICATION SHEET
Dimensions:
1.73"H x 17.50"W x 12.13" (43.9mm x 444.5mm x 308.2mm)
Mounting option:
Integral brackets mount to 19" wide EIA-310/IEC 60297 rack rails
Accessories:
Mounting hardware and fibre routing accessory kit included; contains two
FMS1 fibre management spools, two 30mm size rubber grommets, one
PG11 cable gland, Panduit
™
Pan-Ty
™
Cable Ties and M6 x 1
mounting screws
key features and benefits
applications
technical information
specifications
Pre-loaded with
Factory configured with duplex SC, LC or E-2000
fibre optic adapters
adapters for fast and easy cabling and installation
Slide-out drawer
Slides forward a full 300mm for service access to all fibre
terminations, connections and splices
Field terminate or fusion splice
Supports both field termination via pot-and-polish or
Panduit
™
Opticam
™
Connectors or field splicing (fusion
or mechanical) with appropriate slack storage and cable
management provisions
Multiple cable entry methods
Trunk and interconnect cable entry via PG11 glands,
5mm blown fibre glands, 20mm knockouts or 30mm
rubber grommets
Two-piece, all-metal
Simple and economical installation with no loose
body construction
components to misplace; improved protection over
plastic fibre drawers
Dedicated labelling areas
Silk-screened white labelling areas for individual fibre
channel identification plus overall enclosure labelling
Opticom
™
Pre-Loaded Fibre Drawers provide
a factory configured, ready to install system
for managing fibre optic terminations,
connections and patching in a variety of
applications. The enclosure can serve as a
transition from backbone cabling to
distribution switching in telecommunications
rooms, can act as an interconnect to active
equipment switches in a fibre to the zone
application, or can be used as a transition
enclosure for splicing to service provider
trunks and then patching to premise
intra-building cabling.
The pre-loaded enclosures can terminate
and manage up to 48 fibres in 1 RU
depending on configuration and adapter
type. Enclosures are pre-loaded with SC,
LC or E-2000 style adapters suitable for use
with 62.5/125µm (OM1), 50/125µm (OM2 or
OM3/OM4) multimode or OS1/OS2
singlemode fibre. The simple two-piece
design features a slide-out drawer for full
access to all fibre terminations. This
supports fast and intuitive installation plus
easy moves, adds and changes.
Pre-loaded fibre drawers provide a pre-configured,
ready-to-install system for managing fibre optic terminations,
connections and patching in a 1 RU rack mount enclosure.
The pre-loaded enclosure accommodates both field
termination and field splicing, and supports trunk cable
entry via PG style glands, blown fibre glands and metric
knockouts with rubber grommets. The pre-loaded
enclosure is a two-piece design with a slide-out drawer
for full access to all fibre terminations, easy moves,
adds and changes and simple installation. The enclosure
has silk-screened white areas adjacent to each adapter for
individual fibre channel labelling and a similar silk-screen
area for overall enclosure labelling. The enclosure has
integral mounting brackets suitable for installation in any
19" wide EIA-310/IEC 60297 compatible rack or cabinet.
Opticom
™
Pre-Loaded Fibre Drawer
for OM1 62.5/125µm Multimode
Fibre – Phos. Bronze Sleeve
6 duplex
SC adapters:
FD1W6EIDSC
12 duplex
SC adapters:
FD1W12EIDSC
24 duplex
SC adapters:
FD1W24EIDSC
12 duplex
LC adapters:
FD1W12EIDLC
24 duplex
LC adapters:
FD1W24EIDLC
Opticom
™
Pre-Loaded Fibre Drawer
for OM2 50/125µm Multimode
Fibre – Phos. Bronze Sleeve
6 duplex
SC adapters:
FD1W6BLDSC
12 duplex
SC adapters:
FD1W12BLDSC
24 duplex
SC adapters:
FD1W24BLDSC
12 duplex
LC adapters:
FD1W12BLDLC
24 duplex
LC adapters:
FD1W24BLDLC
Opticom
™
Pre-Loaded Fibre Drawer
for OM3/OM4 50/125µm Multimode
Fibre – Zirconia Split Sleeve
6 duplex
SC adapters:
FD1W6AQDSCZ
12 duplex
SC adapters:
FD1W12AQDSCZ
24 duplex
SC adapters:
FD1W24AQDSCZ
12 duplex
LC adapters:
FD1W12AQDLCZ
24 duplex
LC adapters:
FD1W24AQDLCZ
Opticom
™
Pre-Loaded Fibre Drawer
for OS1/OS2 9/125µm Singlemode
Fibre – Zirconia Split Sleeve
6 duplex
SC adapters:
FD1W6BUDSCZ
12 duplex
SC adapters:
FD1W12BUDSCZ
24 duplex
SC adapters:
FD1W24BUDSCZ
12 duplex
LC adapters:
FD1W12BUDLCZ
24 duplex
LC adapters:
FD1W24BUDLCZ
12 duplex
E-2000 adapters:
FD1W12BUDE2KZ
24 duplex
E-2000 adapters:
FD1W24BUDE2KZ
Opti-Core
™
Patch Cords and Pigtails
Duplex SC to SC
patch cords:
F^LD3-3M‡
Simplex SC to
buffered pigtail:
F^B3-NM‡Y
Duplex LC to LC
patch cords:
F^LE10-10M‡
Simplex LC to
buffered pigtail:
F^B10-NM‡Y
Simplex E-2000 to
buffered pigtail
(singlemode only):
F9B16-NM‡
Opticom
™
Splicing Accessories
Fibre splice chip,
24 fusion splices:
FSC24
Fibre splice
module, 24
fusion splices:
FOSMF
Fibre splice
module, 12
mechanical splices:
FOSMM
^Substitute for fibre type 6 (OM1 – 62.5/125µm), 5
(OM2 – 50/125µm), X (OM3/OM4 –
10G
IG
™
50/125µm)
and 9 (OS/OS2-9/125µm).
‡Substitute for length in metres: Patch cords – 1 – 10,
15, 20, 25 or 30; pigtails – 1, 2 or 3.
Contact Customer Service for other available lengths.
Opticom
™
Pre-Loaded Fibre Drawers
www.panduit.com