Cut Sheet

PHYSICAL INFRASTRUCTURE SYSTEMS
A.
System
Overview
B.
Copper
Systems
C.
Fiber
Optic
Systems
D.
Power
over
Ethernet
E.
Zone
Cabling
F.
Wireless
G.
Outlets
H.
Media
Distribution
I.
Physical
Infrastructure
Management
J.
Overhead &
Underfloor
Routing
K.
Surface
Raceway
L.
Cabinets,
Racks &
Cable
Management
M.
Grounding &
Bonding
N.
Industrial
O.
Labeling &
Identification
P.
Cable
Management
Accessories
Q.
Index
12x4 FiberRunner
®
Mounting Brackets
FR12TRBE58
FR12TRBE58M
FR12TRBN58
FR12TRBN58M
FR12USB
FR12ACB12
FR12ACB58
FR12ACB12M
FR12ACB58M
FR12CS12
FR12CS58
FR12CS12M
FR12CS58M
FR12ALB
FR12TB12
FR12TB58
FR12TB12M
FR12TB58M
Part Number Part Description
For
Threaded
Rod Size
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Existing Threaded Rod QuikLock
™
Bracket for 12x4 System
FR12TRBE58
Used to support the 12x4 system from existing
threaded rod installations. Bracket is secured to
threaded rod with two split nuts. The pre-assembled
slide clamps enable fast assembly to channel. Use
7/16" nut driver on slide clamps.
5/8" 1 —
FR12TRBE58M
16mm 1 —
New Threaded Rod QuikLock
™
Bracket for 12x4 System
FR12TRBN58
Used to support the 12x4 system from new threaded
rod installations. Bracket is secured to threaded rod
with two split nuts. The pre-assembled slide clamps
enable fast assembly to channel. Use 7/16" nut driver
on slide clamps.
5/8" 1 —
FR12TRBN58M
16mm 1 —
Underfloor Pedestal QuikLock
™
Bracket for 12x4 System
FR12USB
Used to support the 12x4 system by attaching to
underfloor pedestals. (Contains all necessary
hardware.) Use on pedestals up to 2" in diameter.
The pre-assembled slide clamps enable fast
assembly to channel. Use 7/16" nut driver on
slide clamps.
— 1 —
Adjustable Ladder QuikLock
™
Bracket for 12x4 System
FR12ALB
Used to support the 12x4 system attaching to any
3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x
2" (50.8mm) ladder rack rail. Adjustable to nine
incremental positions from 4" (101mm) to 12"
(305mm) above or below the ladder rack. No
threaded rod required. The pre-assembled slide
clamps enable fast assembly to channel. Use 7/16"
nut driver on slide clamps.
— 1 —
Center Support QuikLock
™
Bracket for 12x4 System
FR12CS12
Used to support the 12x4 system from below with
new threaded rod. Bracket is secured to threaded rod
with two nuts. The pre-assembled slide clamps enable
fast assembly to channel. Use 7/16" nut driver on
slide clamps. Also can be secured directly to the top
of cabinets.
1/2" 1 —
FR12CS58
5/8" 1 —
FR12CS12M
12mm 1 —
FR12CS58M
16mm 1 —
Top Support Adjustable "C" QuikLock
™
Bracket for 12x4 System
FR12ACB12
Used to support the 12x4 system from any new
threaded rod extending down directly from the ceiling,
grid, or ladder rack system. Two position height
adjustments to accommodate system with or without
hinged cover. Bracket is secured to threaded rod with
two nuts. The pre-assembled slide clamps enable
fast assembly to channel. Use 7/16" nut driver on
slide clamps.
1/2" 1 —
FR12ACB58
5/8" 1 —
FR12ACB12M
12mm 1 —
FR12ACB58M
16mm 1 —
Trapeze QuikLock
™
Bracket for 12x4 System
FR12TB12
Used to support the 12x4 system by spanning two
threaded rod drops that are 18" apart. Can be
installed from above or below. Bracket is secured to
each threaded rod with two nuts. The pre-assembled
slide clamps enable fast assembly to channel. Use
7/16" nut driver on slide clamps.
1/2" 1 —
FR12TB58
5/8" 1 —
FR12TB12M
12mm 1 —
FR12TB58M
16mm 1 —
Prime items appear in BOLD.
Order number of pieces required, in multiples of Standard Package Quantity.