Cut Sheet

QuickNet
™
Fiber Cable Assembly Options
MPO to MPO Trunks/Interconnect
• Trunk or interconnect fiber cable with 12-fiber MPO connector(s) or LC connectors
on each end
• Trunks offer greater mechanical protection (3x crush) than interconnects and are
built with pulling eye. Preferred for lengths >30m/100 ft.
• Typically used in cabinet-to-cabinet permanent backbone links
• Installs into QuickNet
™
Fiber Adapter Panels (FAP) or cassettes
Duplex LC to Duplex LC Patch Cord
• Patch cord with duplex LC connectors on both ends
• Typically used in cross-connect and as equipment patch cords in data centers
• Connect to pre-terminated cassettes in main, horizontal, and equipment distribution
MPO to LC Harness
• Harness cable with 12-fiber or 8-fiber LC connector(s) on one end and one MPO
connector on the other end
• Typically used for connectivity between the switch in horizontal cabling
• Installs into QuickNet
™
MPO Patch Panels on one end and switch ports on the
other end
End 1 End 2
Duplex LC Connector
(patch cord)
MPO
Connector
LC Connector
(trunk/harness)
End 1 and End 2 Options
Tethered
Cassette
PanMPO
Connector
www.panduit.com
7
PanMPO Cable Assemblies
• Easily convert between male and female gender and between key-up and key-down
polarity for 10G to 40G Ethernet installation
• Connector changes are made in the field as needed
• Available on trunks, harnesses and interconnects