Installation Manual

Direct Burial Compression Connectors

Rev. 02

Page 1 of 2

INSTALLATION INSTRUCTIONS T-PMPI-289-PC

PANDUIT

Corp.

For Technical Support: www.panduit.com/resources/install_maintain.asp

GCE GCC6X6 GPC

Views Using Cable Ties

Crimp (1)* Crimp (2) Crimp (3)

Crimping Views

Post Crimp Post Crimp

*One crimp IEEE Std. 837

™

– 2002 only available for part numbers GCE1/0-1/0 and GCE6X61/0-1/0.

LISTED

467

CERTIFIED

22.2

one crimp exceeds:

LISTED

467

CERTIFIED

22.2

optional crimp exceeds:

Meets All

837

™

– 2002

Requirements

Meets All

837

™

– 2002

Requirements

PAGE 1
Direct Burial Compression Connectors INSTALLATION INSTRUCTIONS T-PMPI-289-PC © 2008 PANDUIT Corp. GCE GCC6X6 GPC Views Using Cable Ties Crimping Views Post Crimp Crimp (1)* Post Crimp Crimp (2) Crimp (3) one crimp exceeds: optional crimp exceeds: Meets All LISTED 467 CERTIFIED 22.2 Meets All LISTED 467 837™ – 2002 Requirements CERTIFIED 22.2 837™ – 2002 Requirements *One crimp IEEE Std. 837™ – 2002 only available for part numbers GCE1/0-1/0 and GCE6X61/0-1/0. For Technical Support: www.
PAGE 2
INSTALLATION INSTRUCTIONS T-PMPI-289-PC Ground Plate Assembly Connector to be assembled so stud is flush or protruding from the end of the connector prior to crimping as shown. Crimp Die: CD-930G-250 (PG25/Black) Crimp Tools: CT-2931, CT-2931E, CT-930,CT-930CH, CT-2930, CT-940CH*, CT-2940* *Requires die adapter CD-940-DA Ground Plate Views Wall install Floor install Meets All LISTED 467 CERTIFIED 22.