Installation Manual

INSTALLATION INSTRUCTIONS T-PMPI-289-PC
Page 2 of 2
For Instructions in Local Languages
and Technical Support:
http://www.panduit.com/resources/install_maintain.asp
E-mail:
[e-mail]
Fax:
[phone]
www.panduit.com
Rev. 02
Note: Factory installed anti-oxidant may discolor over time, but product performance is not diminished.
Remove all non-conductive material from mating surfaces prior to installation.
Ground Plate Assembly
Ground Plate Views
Wall install Floor install
LISTED
467
CERTIFIED
22.2
Meets All
837
™
– 2002
Requirements
Connector to be assembled so stud is flush or
protruding from the end of the connector prior
to crimping as shown.
Crimp Die: CD-930G-250 (PG25/Black)
Crimp Tools: CT-2931, CT-2931E, CT-930,CT-930CH,
CT-2930, CT-940CH*, CT-2940*
*Requires die adapter CD-940-DA