Technical Bulletin
Ordering Information
P
ANDUCT
®
Hinged Cover Wiring Duct
Note: Base and cover are sold separately.
Product shown in LG (Light Gray). Type HN also available in WH (White), Type H and Type HS also available in BL (Black) and WH (White)
Control Panel Application
Communication Application
■
Frequent moves, adds, changes or equipment
upgrades require repeated, easy, and quick access
to duct channel
■
High visibility and high traffic areas require a
neat appearance
■ Covers represent 20% of the cost of the wiring
duct purchase
■ Misplaced covers are a common occurrence after
years of use
■ Hinged cover wiring duct eliminates lost covers
Prevent Cover Replacement Costs
■ By eliminating the time involved in removing and replacing covers with hinged cover wiring duct, simple wiring
changes can be made up to 20% faster compared to conventional wiring duct installations*
Labor Savings
P
ANDUCT
®
Hinged Cover Wiring Duct
■ Cover fully engages fingers limiting sidewall flex for greater
rigidity and durability*
■ Cover retention is up to 2 times greater than conventional
wiring ducts**
Ease of Installation and Access
Durability and Performance
*Based on mock panel installations of Type H Hinged Cover Wiring Duct and other commonly available wiring ducts adding a single component with four wires.
**Based on test and measurements comparing Type H Hinged Cover Wiring Duct to other commonly available wiring ducts.
% of Wiring Duct Cost
20%
40%
60% 80%
100%
0%
Base Cover
Technical Information
■ Cover retention flanges guide duct fingers into cover for simple
push-on co
ver installation
■ Cover hinges open to 100° from either sidewall to allow full
channel access
OR
D
B
H
E1
F1
T
A
C
100°
Type HN: Narrow Slot Type H: Wide Slot Type HS: Solid Wall
Type HN Duct Part
Numbers
Type H Duct Part
Numbers
Type HS Duct Part
Numbers
Duct Nominal Size
Cover Part
Numbers
Standard Carton
Quantity
W X H
(inches)
W X H
(mm)
Duct
(Ft.)
Cover
(Ft.)
HN1.5X2LG6 H1.5X2LG6 HS1.5X2LG6NM 1.5 x 2.0 37 x 50 HC1.5LG6 120 120
HN1.5X3LG6 H1.5X3LG6 HS1.5X3LG6NM 1.5 x 3.0 37 x 75 HC1.5LG6 120 120
HN2X2LG6 H2X2LG6 HS2X2LG6NM 2.0 x 2.0 50 x 50 HC2LG6 120 120
HN2X3LG6 H2X3LG6 HS2X3LG6NM 2.0 x 3.0 50 x 75 HC2LG6 60 120
HN2X4LG6 H2X4LG6 HS2X4LG6NM 2.0 x 4.0 50 x 100 HC2LG6 60 120
HN3X3LG6 H3X3LG6 HS3X3LG6NM 3.0 x 3.0 75 x 75 HC3LG6 60 120
HN3X4LG6 H3X4LG6 HS3X4LG6NM 3.0 x 4.0 75 x 100 HC3LG6 60 120
HN4X4LG6 H4X4LG6 HS4X4LG6NM 4.0 x 4.0 100 x 100 HC4LG6 60 60
Duct Size
(W x H)
Dimensions – Inches (mm)
ABCDE1F1E2F2HKT
1.5 x 2 1.75 1.98 1.88 1.63 0.20 0.50 0.31 .80 1.92 .08
(38.1) x (50.8) (44.5) (50.3) (47.8) (41.4) (5.0) (12.7) (7.9) (20.3) (48.8) (2.0)
1.5 x 3 1.75 3.06 1.88 2.63 0.20 0.50
0.31 1.00 3.00 .10
(38.1) x (76.2) (44.5) (77.7) (47.8) (66.8) (5.0) (12.7)
(7.9) (25.4) (76.2) (2.5)
2 x 2 2.17 1.98 2.29 1.57 0.20 0.50 0.31 .80 1.92 .50 .08
(50.8) x (50.8) (55.1) (50.3) (58.2) (39.9) (5.0) (12.7) (7.9) (20.3) (48.8) (12.7) (2.0)
2 x 3
2.17 3.06 2.29 2.63 0.20 0.50
0.31 1.00 3.00 .50 .10
(50.8) x (76.2) (55.1) (77.7) (58.2) (66.8) (5.0) (12.7)
(7.9) (25.4) (76.2) (12.7) (2.5)
2 x 4 2.17 4.1 4.38 3.63 0.20 0.50 0.31 1.00 4.00 .50 .10
(50.8) x (101.6) (55.1) (104.1) (111.3) (92.2) (5.0) (12.7) (7.9) (25.4) (101.6) (12.7) (2.7)
3 x 3 3.25 3.06 3.38 2.63 0.20 0.50
0.31 1.00 3.00 1.00 .10
(76.2) x (76.2) (82.6) (77.7) (85.9) (66.8) (5.0) (12.7)
(7.9) (25.4) (76.2) (25.4) (2.5)
3 x 4 3.25 4.1 3.38 3.63 0.20 0.50 0.31 1.00 4.00 1.00 .11
(76.2) x (101.6) (82.6) (104.1) (85.9) (92.2) (5.0) (12.7) (7.9) (25.4) (101.6) (25.4) (2.8)
4 x 4 4.25 4.1 4.38 3.63 0.20 0.50
0.31 1.00 4.00 1.50 .11
(101.6) x (101.6) (108.0) (104.1) (111.3) (92.2) (5.0) (12.7)
(7.9) (25.4) (101.6) (38.1) (2.8)
On CL
T
A
B
C
100°
D
H
E2
F2
For 2", 3", and 4" wide duct.
4.0 [101.6] TYP 2.0
[50.8]
K
C
L
K
For 2", 3", and 4" wide duct.
2.0
[50.8]
2.0 TYP
[50.8]
K
C
L
K
Type HN: Multiple slot restrictors
present with 3" and greater duct
wall height.
Type HN 2", 3" and 4" wide duct.
Type H 2", 3", and 4" wide duct.
Type H