Technical Bulletin
• Secures wire ends while harness is being fabricated
• Used with #28 thru #16 AWG wires
• For indoor use only
Part Number Material Color Mounting Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
WEH-E8-C Acetal Black Two #8 (M4) Screws 100 1000
.53
(13.5)
.77
(20.0)
1.22
(31.0)
.37
(9.4)
.18 (4.6)
.29 (7.4)
.16 (4.1)
• Harness board spring and spring holder holds wire ends secure
while harness is being fabricated
• Wires simply pull out from spring when harness is removed
• Each SHH Spring Holder is supplied with one rigid wire piece to
hold the spring laterally and two #8 (M4), 2 inch (50.8mm)
hex head wood screws; purchase spring separately
A
.44 (11.2)
.53 (13.4)
1.30
(33.0)
.19 (4.8) Dia.
A
SHH
PBSC
Part Number
Hole Spacing
A
Material Color Mounting Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.In. mm
PBSC1-X 1.00 25.4
Steel
— SHH1 Spring Holder 10 100
PBSC3-X 3.00 76.2 — Two #8 (M4) Screws 10 100
PBSC6-X 6.00 152.4 — SHH3 Spring Holder 10 100
PBSC12-X 12.00 304.8 — Two #8 (M4) Screws 10 100
SHH1-S8-X 1.85 47.0
Nylon 6.6 Natural
Two #8 (M4) Screws 10 100
SHH3-S8-X 6.80 172.7 Two #8 (M4) Screws 10 100
• Holds wires in a specific orientation
• No sharp edges to damage wire insulation
• Will accept wires up to 18 AWG
• Fanning strip can remain as part of completed harness
12.1
(307.8)
.31 (7.9)
.04 (1.0)
.12 (3.0)
.16 (4.0)
.06 (1.5)
6.00 (152.4)
.62 (15.7)
.56
(14.2)
1.50
(38.1)
.75
(19.0)
.04 (1.0)
.53
(13.5)
1.10
(28.0)
3.2 (81.3)
1.42
(36.0)
.04 (1.0)
.60
(15.2)
FSH40 FSHH
FS156
Part Number Material Color Mounting Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
FS156-C Nylon 6.6 Natural FSH Holder 100 1000
FSH40-X
ABS Black
Four #8 (M4) Screws 10 100
FSHH-X Two #8 (M4) Screws 10 100
• Used to hold a push mount accessory or cable tie at a specific location on a harness board
.50
(12.7)
A
B
(Dia)
A
C
.28 DIA
(7.2)
TYP. 3 PLACES
D
B
E
.21 DIA
(5.3)
TYP. 2 PLACES
• Designed to be attached to the wire harness
during assembly
• Cable ties can be installed by hand or with Panduit
automatic cable tie tools
• Used with harness board standoff posts
• Available with or without corrugated tubing location tab
• Natural nylon material for indoor use
• Heat stabilized nylon material (30) for high temperature
applications – indoor use
*Cable tie cross section sizes: M = Miniature, I = Intermediate, S = Standard.
1.54
(39.1)
.160
(4.1)
.37
(9.4)
Part Number
Used
with
Cable
Ties*
Maximum
Panel
Thickness
Panel
Hole
Diameter
Material Color
Mounting
Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.In. mm In. mm
FOR CORRUGATED TUBING – A location tab on the mount shelf aligns with the corrugated tubing grooves
to ensure proper mount location during assembly
THMSP20-C M, I, S .160 4.1 .244 – .283 6.2 – 7.2 Nylon 6.6 Natural Push barb 100 1000
THMSP20-C30 M, I, S .160 4.1 .244 – .283 6.2 – 7.2 Heat Stabilized
Nylon 6.6
Black Push barb 100 1000
THMSP25-C M, I, S .230 5.8 .244 – .283 6.2 – 7.2 Nylon 6.6 Natural Push barb 100 1000
THMSP25-C30 M, I, S .230 5.8 .244 – .283 6.2 – 7.2 Heat Stabilized
Nylon 6.6
Black Push barb 100 1000
FOR DISCRETE WIRING – No location tab
THMSP20F-C M, I, S .160 4.1 .244 – .283 6.2 – 7.2 Nylon 6.6 Natural Push barb 100 1000
THMSP20F-C30 M, I, S .160 4.1 .244 – .283 6.2 – 7.2 Heat Stabilized
Nylon 6.6
Black Push barb 100 1000
THMSP25F-C M, I, S .230 5.8 .244 – .283 6.2 – 7.2 Nylon 6.6 Natural Push barb 100 1000
THMSP25F-C30 M, I, S .230 5.8 .244 – .283 6.2 – 7.2 Heat Stabilized
Nylon 6.6
Black Push barb 100 1000
Harness Board Accessories – Tie Mount Fixtures
Harness Board Accessories – Wire Termination
Harness Board Standoff Posts and Adapter
Tie Harness Mounts – Nylon and Heat Stabilized Nylon 6.6
Wire End Holder
Spring Wire Breakout System
Fanning Strip System
4 5
Part Number
Height
A
Hole
Diameter
B
Length
C
Width
D
For Use With Material
Mounting
Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.In. mm In. mm In. m In. mm
HB2SP19-X 2.00 50.8 .20 5.2 2.00 50.8 .50 12.7 PLWP, PRWP,
WS, VWS,
HWS, TPM
Aluminum M6 Screw 10 100
HB2SP25-X 2.00 50.8 .30 7.5 4.00 101.6 .50 12.7 PLWP, PRWP,
PLP, THMS,
HCMP, PMCC
Aluminum M6 Screw 10 100
HBUA-X .31 7.9 .28 7.1 3.00 76.2 1.00 25.4 HB2SP19-X,
HB2SP25-X
Nylon 6.6 #10 (M5)
Screw
10 100