Technical Bulletin

Harness Board Accessories – Tie Mount Fixtures (Continued)
Harness Board Accessories – Tie Mount Fixtures (Continued)
■
Automatic alignment orients the tool head with the mount for reliable feeding of the
cable tie through the mount to speed installation
■
Multiple fixture configurations allow mounting in horizontal, vertical, or 45° orientation
to reduce installation time and improve ergonomics
■
Color designation ensures inserts and mounts are correctly matched
■
Integrated switch* capability enables placement of a switch to detect the mount’s
presence providing an input to a quality control system, eliminating the need for
additional inspection
■
Activation device on harness board fixture prevents tool from operating unless it is
properly engaged in the fixture for operator safety
2.38
(60)
2.50
(64)
5.04
(128)
Order number of pieces required, in multiples of Standard Package Quantity.
*The Omron Electronics D2SW-3L1HS switch is compatible with the ATM system. Similar switches from other manufacturers may also
be suitable.
Omron is a registered trademark of Omron Corporation.
Part Number Description Mounting
Method
Color Material
Std.
Pkg
.
Qty.
*
Std.
Ctn.
Qty.
ATMB Base Screw base to
harness board with
1/4" screws
Black Acetal 10 10
ATMI-W187-X Insert for
ATM-W187 mount
Snaps into ATMB Yellow Acetal 10 50
ATMI-W250-X Insert for
ATM-W250 mount
Snaps into ATMB Red Acetal 10 50
ATMI-XMR Used for cable tie
installations where
mounts are
NOT required
Snaps into ATMB Black Acetal 10 50
ATMC Clamp used to secure
the ATMB (base) in a
vertical or 45° position
Screw clamp to
harness board with
1/4" screws
Black Steel 10 10
ATMB (Base)
A
B
C
Automatic Cable Tie Mounts
■
Multiple sizes work with industry standard panel thickness and hole
diameters for greater application flexibility
■
Low profile design keeps bundle close to mounting surface saving space
where tight assemblies are required, and providing greater protection for
bundles in high vibration applications
■
Load rating of mounts supports compatible BT1.5M-XMR and
PLT1.5M-XMR cable ties
Order number of pieces required, in multiples of Standard Package Quantity.
Part Number
Used with
Cable Ties
A
Length
B
Width
C
Height
Maximum
Panel
Thickness
Panel Hole
Diameter Range
Material Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.In. mm In. mm In. mm In. mm In. mm
ATM-W187-M
BT1.5M-XMR,
PLT1.5M-XMR
.80 20.5 .35 9.0
.58 14.6
.12 3.0
.17 – .20 4.3 – 4.9
Nylon 6.6
Natural 1000 5000
ATM-W187-M20
Black 1000 5000
ATM-W187-M30
Heat
Stabilized
Nylon 6.6
Black 1000 5000
ATM-W250-M
.66 16.6 .23 – .26 5.7 – 6.6
Nylon 6.6
Natural 1000 5000
ATM-W250-M20
Black 1000 5000
ATM-W250-M30
Heat
Stabilized
Nylon 6.6
Black 1000 5000
Harness Board Fixtures
6 7