Cut Sheet

www.panduit.com
FiberRunner
®
2x2 Routing System
SPECIFICATION SHEET
specifications
applications
key features and benefits
Open channel Cable No. of Cables
50% fill capacity: 1.6mm 546
(2" pile up) 2.0mm 349
3.0mm 155
Fiber Optic
Ribbon Interconnect 5.20mm 52
Category 6 6.35mm 35
Category 6A 7.57mm 24
Material: Rigid PVC (Channel), ABS (Fittings)
Flammability: 94V-0
Approvals: UL Listed to 2024A Optical Fiber Cable Routing Assemblies
Compliant with the applicable tests in Telcordia GR-63-CORE
Network Equipment Building Systems Level 3
CSI spec form: LP-CSISPEC-FR
technical information
The 2x2 routing system shall be a system of channel, fittings,
and brackets designed to segregate, route, and protect fiber
optic and high performance copper cabling. Channel and fittings
shall be assembled using pre-assembled couplers. A selection
of spillout options shall be available that easily attach using the
vertical tee. Fittings maintain a minimum 2" bend radius to
protect against signal loss due to excessive cable bends.
Available system colors shall be yellow, orange, and black. A full
complement of brackets shall be available for attaching system
components to ladder rack, threaded rod, auxiliary framing,
strut, equipment racks and raised floor pedestals.
The FiberRunner
®
2x2 Routing System is a
system of channel, fittings, and brackets designed
to segregate, route, and protect fiber optic and high
performance copper cabling. It is suited for data
center applications where cable is routed from
distribution areas to equipment cabinets or racks.
It is used in Telco Central Offices to route fiber optic
jumper cables between fiber distribution frames and
equipment bays. It can be deployed over the racks
or in approved underfloor applications.
Channel and fittings are assembled using timesaving
Panduit
®
QuikLock
™
Couplers. A selection of
spillout options is available that easily attach using
the vertical tee. Fittings maintain a 2" bend radius to
protect against signal loss due to excessive cable
bends. Available system colors are yellow, orange,
and black to differentiate various types of cabling.
A full complement of brackets is available to attach
system components to support structures found in
all applications.
The FiberRunner
®
2x2 Routing System is part of the
Panduit complete fiber distribution system, which
includes the FiberRunner
®
24x4, 12x4, 6x4, and 4x4
Routing Systems, the Fiber-Duct
™
4x4 and 2x2
Routing Systems, cable management, and racks.
Fastest installations No bolts need to be tightened and no tools are required when installing the
QuikLock
™
Coupler; QuikLock
™
Couplers take less than five seconds to
make a mechanically secure connection
Easy to maintain Hinged channel cover, hinged door vertical tee and solid fitting covers
protect cabling and provide fast and easy access for future cabling moves,
adds, and changes
System strength Robust system of channel, covers, fittings and other non-metallic system
components protect cable from physical damage; system includes full range
of directional and spillout fittings
Versatility The vertical tee accepts a 3-sided trumpet, transition to corrugated tubing
and Panduit
®
FiberRunner
®
and Fiber-Duct
™
Systems
Cable protection A minimum 2" bend radius maintained throughout all fittings prevents
excessive bends in fiber optic cabling
Channel and Cover
2x2 solid hinged
channel (6'): HS2X2**6NM
2x2 slotted hinged
channel (6'): H2X2**6
2x2 hinged cover (6'): HC2**6
Cable retainer: WR2H-C
Fittings and Spillouts
QuikLock
™
Coupler: FBC2X2**
Horizontal right angle: FRA2X2**
Horizontal tee: FT2X2**
4-way cross: FFWC2X2**
End cap: FHDEC2X2**
Inside vertical 45°: FIV452X2**
Outside vertical 45°: FOV452X2**
Inside vertical 90°: FIVRA2X2**
Outside vertical 90°: FOVRA2X2**
4x4 Fiber-Duct
™
to
2x2 reducer: FRF42**
4x4 FiberRunner
®
to
2x2 reducer: FRRF4FD2**
Vertical tee: FVTHD2X2**
3-sided BRC
trumpet spillout: FTR2X2**
1-port spillout
to 1.5" I.D.
corrugated tubing: FIDT2X2**
2x2 hinged duct vertical
cable manager kit: FRHD2KT**
Hinged channel 1" bend
radius control trumpet: TRC2HDBL
Mounting Brackets
Existing 1/2" thr rod brkt: FTRBE12
Existing 5/8" thr rod brkt: FTRBE58
New 1/2" thr rod brkt: FTRBN12
New 5/8" thr rod brkt: FTRBN58
Underfloor brkt: FUSB
Ladder rack brkt: FLRB
“L” wall mount brkt: FLB
Adjustable “Z” bracket: FZBA1.5X4
Low profile “Z” bracket: FZBLP
Two-piece ladder rack brkt
1/2" thr rod: F2PCLB12
Two-piece ladder rack brkt
5/8" thr rod: F2PCLB58
Two-piece framing clip 5/8"
thr rod to 9/16" C-channel
aux. framing bars: FRAFC58
**Substitute: YL = Yellow, OR = Orange, BL = Black
2.00
(50.8)
2.17
(55.1)
A = 3.4 in.
2
(2195mm
2
)
Dimensions are in inches
(Dimensions in parentheses
are metric).