User Manual

CREATING SERIALIZATIONS
More Serialization Parameters
The serialization tool includes more parameters on a second screen following the
first screen. The second screen includes Copies and Collate. To access the
second screen press the down directional arrow twice after Increment.
1. The Copies parameter determines the number of copies to print for the
serialization. The Copies parameter can be set to any number from 1 to 99.
To change the Copies parameter, press the up or down directional arrow
keys to highlight Copies.
Press the right directional arrow key to move the cursor to the current value
of the Copies parameter. The Copies parameter will default to a value of 1.
Enter the number of copies to print.
Press the
key to accept the changes.
2. The Collate parameter determines whether or not the copies of the
serialization items will be collated. The Collate parameter only works when
more than one copy of a serialization is defined. The Collate parameter
defaults to No.
If No is selected, then consecutive copies of the serialization items will be
placed together. The result will resemble the following legend:
If Yes is selected for Collate, then consecutive copies of the serialization
items will not be placed together. The result will resemble the following
legend:
To change the Collate parameter, press the up or down directional arrow
keys to highlight Collate.
A01 A02 A03 A01 A02 A03
A01 A01 A02 A02 A03 A03
18