User Manual
Table Of Contents
- PanTher™ LS8EQ
- Hand-Held Thermal Transfer Printer
- Operator’s Manual
- Section 1: Getting Started 3
- Introduction and Safe Operation 4-6
- General Description 7-8
- Loading Batteries and Label Cassette 9
- Keyboard Functions 10-11
- Creating Labels
- Creating Serializations 16-18
- Setting up the PanTher™ LS8EQ and Using File Manager 31-33
- Printer Cleaning Instructions 63-64
- Warranty Information ….. 69
- General Specifications 70
- Global Technical Support Information 71
- Batteries
- Replace All Six Batteries At The Same Time
- A01 A01 A02 A02 A03 A03
- A01 A02 A03 A01 A02 A03
- A01
- A01 A02
- A01
- A01
- A01
- A01
- A01 A02 A03 A04 A05 A06
- WARNING
- WARNING
- The Setup Menu
- The setup menu is used to modify the default printer settings. The setup menu should be accessed from the home screen. To access the setup menu press the SETUP key.
- Heat Shrink Serialization…
CREATING BAR CODES
Bar Code Settings
The default bar code settings can be changed in the setup menu. To change the
default settings, access the printer settings in the setup menu.
Bar Code: Indicates what bar code symbology is currently chosen. This setting
allows CODE 39 and CODE 128.
Readable: Indicates whether the bar code text is human readable or not. If
activated (bar code text is human readable) the setting will display Yes.
Checksum: Indicates whether the checksum digit is activated or not. If activated
(checksum digit is turned on) the setting will display Yes. Checksum must be
used for CODE 128 bar codes. For CODE 128, checksum will always be
activated.
Bar Size: Indicates the width of the bar code. Available sizes are 0.010 inches,
0.015 inches, and 0.020 inches. The default width is 0.015 inches.
Serialized Bar Codes
The PANTHER™ LS8EQ is able to serialize bar codes. In order to do so, a
serialization must first be defined. Please see the section entitled “CREATING
SERIALIZATIONS” for more information about serialized bar codes.
25