User Manual
Table Of Contents
- PanTher™ LS8EQ
- Hand-Held Thermal Transfer Printer
- Operator’s Manual
- Section 1: Getting Started 3
- Introduction and Safe Operation 4-6
- General Description 7-8
- Loading Batteries and Label Cassette 9
- Keyboard Functions 10-11
- Creating Labels
- Creating Serializations 16-18
- Setting up the PanTher™ LS8EQ and Using File Manager 31-33
- Printer Cleaning Instructions 63-64
- Warranty Information ….. 69
- General Specifications 70
- Global Technical Support Information 71
- Batteries
- Replace All Six Batteries At The Same Time
- A01 A01 A02 A02 A03 A03
- A01 A02 A03 A01 A02 A03
- A01
- A01 A02
- A01
- A01
- A01
- A01
- A01 A02 A03 A04 A05 A06
- WARNING
- WARNING
- The Setup Menu
- The setup menu is used to modify the default printer settings. The setup menu should be accessed from the home screen. To access the setup menu press the SETUP key.
- Heat Shrink Serialization…
SETTING UP THE PANTHER LS8EQ
AND USING FILE MANAGER
The P
ANTHER™ LS8EQ has the ability to store and recall label files. Label files
are stored and recalled within File Manager. Label files are designated with a
.LS8 ending.
To access the File Manager, press the SHIFT key and then press the PAGE key:
1. Use the right or left directional arrow keys to select the desired file. There
are 30 file storage locations in the P
ANTHER™ LS8EQ.
NOTE: When saving a new file, press the
key to begin entering a
file name. Use the alphabetic or numeric keys to enter a file
name. After entering a file name, press the
key again to
Save.
NOTE: When renaming a previously saved file, press the
key to
begin entering the new file name. Use the alphabetic or
numeric keys to enter the new file name. After entering the
name, press the
key again to Save. .
2. Use the up or down directional arrow keys to highlight Action.
3. Use the right or left directional arrow keys to select Save, Load, Delete, or
Delete All.
WARNING: Selecting Delete All will erase all stored labels.
4. Press the
key to complete the selected action.
34