User Manual
Table Of Contents
- PanTher™ LS8EQ
- Hand-Held Thermal Transfer Printer
- Operator’s Manual
- Section 1: Getting Started 3
- Introduction and Safe Operation 4-6
- General Description 7-8
- Loading Batteries and Label Cassette 9
- Keyboard Functions 10-11
- Creating Labels
- Creating Serializations 16-18
- Setting up the PanTher™ LS8EQ and Using File Manager 31-33
- Printer Cleaning Instructions 63-64
- Warranty Information ….. 69
- General Specifications 70
- Global Technical Support Information 71
- Batteries
- Replace All Six Batteries At The Same Time
- A01 A01 A02 A02 A03 A03
- A01 A02 A03 A01 A02 A03
- A01
- A01 A02
- A01
- A01
- A01
- A01
- A01 A02 A03 A04 A05 A06
- WARNING
- WARNING
- The Setup Menu
- The setup menu is used to modify the default printer settings. The setup menu should be accessed from the home screen. To access the setup menu press the SETUP key.
- Heat Shrink Serialization…
PANTHERLINK
Click exit to exit the installation program
Using PANTHERLINK
To use P
ANTHERLINK software with the PANTHER ™ LS8EQ printer:
1. Connect the USB cable (included with LS8EQ-KIT and LS8-PCKIT) to a
personal computer.
2. Connect the USB cable to the P
ANTHER™ LS8EQ at the USB port.
3. Turn ON the P
ANTHER™ LS8EQ.
4. Press the SETUP key to access the setup menu.
5. Use the up or down directional arrow keys to highlight PC Interface.
6. Press the
key.
7. Use the up or down directional arrow keys to highlight Files/Printing, Symbol
Transfer, or Firmware Upgrade.
8. Press the
key.
9. When choosing Firmware Upgrade, select Yes and then press
.
10. The LS8EQ is now ready to communicate to a personal computer.
11. Open
PANTHERLINK software on a personal computer.
12. Use P
ANTHERLINK to transfer data files, label files, or symbols between the
P
ANTHER™ LS8EQ and a computer or for upgrading your LS8EQ printer
firmware.
41