User Manual
Table Of Contents
- PanTher™ LS8EQ
- Hand-Held Thermal Transfer Printer
- Operator’s Manual
- Section 1: Getting Started 3
- Introduction and Safe Operation 4-6
- General Description 7-8
- Loading Batteries and Label Cassette 9
- Keyboard Functions 10-11
- Creating Labels
- Creating Serializations 16-18
- Setting up the PanTher™ LS8EQ and Using File Manager 31-33
- Printer Cleaning Instructions 63-64
- Warranty Information ….. 69
- General Specifications 70
- Global Technical Support Information 71
- Batteries
- Replace All Six Batteries At The Same Time
- A01 A01 A02 A02 A03 A03
- A01 A02 A03 A01 A02 A03
- A01
- A01 A02
- A01
- A01
- A01
- A01
- A01 A02 A03 A04 A05 A06
- WARNING
- WARNING
- The Setup Menu
- The setup menu is used to modify the default printer settings. The setup menu should be accessed from the home screen. To access the setup menu press the SETUP key.
- Heat Shrink Serialization…
PANTHERLINK
Excel Screens
Convert Excel .CSV File to .DAT File
1. Open PanTherLink software.
2. Select FILE, then "Convert CSV to DAT..."
3. In the Select CSV window, browse to the CSV file created by Excel.
4. Select OPEN. The file name will disappear so that you can rename and save
the file as a .DAT file.
5. In the "Select target DAT file" window, enter a file name for the data file.
6. Browse to the desired folder for saving the data file.
7. Select SAVE.
8. The data file is now created and saved. This file can now be transferred to
the LS8EQ printer using PanTherLink software.
43