User Manual
Table Of Contents
- PanTher™ LS8EQ
- Hand-Held Thermal Transfer Printer
- Operator’s Manual
- Section 1: Getting Started 3
- Introduction and Safe Operation 4-6
- General Description 7-8
- Loading Batteries and Label Cassette 9
- Keyboard Functions 10-11
- Creating Labels
- Creating Serializations 16-18
- Setting up the PanTher™ LS8EQ and Using File Manager 31-33
- Printer Cleaning Instructions 63-64
- Warranty Information ….. 69
- General Specifications 70
- Global Technical Support Information 71
- Batteries
- Replace All Six Batteries At The Same Time
- A01 A01 A02 A02 A03 A03
- A01 A02 A03 A01 A02 A03
- A01
- A01 A02
- A01
- A01
- A01
- A01
- A01 A02 A03 A04 A05 A06
- WARNING
- WARNING
- The Setup Menu
- The setup menu is used to modify the default printer settings. The setup menu should be accessed from the home screen. To access the setup menu press the SETUP key.
- Heat Shrink Serialization…
PANTHERLINK
named Btmap_.bmp. After a custom symbol has been saved on your printer
and if you are in the PC interface, symbol transfer mode, within PanTherLink
software you can click the file location to see a graphic representation of the
symbol.
15. Press DEL twice on the LS8EQ printer to end the PanTherLink session and
return to the SETUP menu.
16. Press SETUP to return to the home screen.
17. To insert the custom symbol file into a label, press INSERT and select
SYMBOL
18. Scroll right or left to select the file to insert. The custom graphic files are
stored in locations 83-92.
19. Press
.
20. The Symbol tool icon will appear on the LS8EQ home screen.
21. Press PRINT.
Downloadable Symbols (.BMP) File Transfer Screens
47