User Manual
Table Of Contents
- PanTher™ LS8EQ
- Hand-Held Thermal Transfer Printer
- Operator’s Manual
- Section 1: Getting Started 3
- Introduction and Safe Operation 4-6
- General Description 7-8
- Loading Batteries and Label Cassette 9
- Keyboard Functions 10-11
- Creating Labels
- Creating Serializations 16-18
- Setting up the PanTher™ LS8EQ and Using File Manager 31-33
- Printer Cleaning Instructions 63-64
- Warranty Information ….. 69
- General Specifications 70
- Global Technical Support Information 71
- Batteries
- Replace All Six Batteries At The Same Time
- A01 A01 A02 A02 A03 A03
- A01 A02 A03 A01 A02 A03
- A01
- A01 A02
- A01
- A01
- A01
- A01
- A01 A02 A03 A04 A05 A06
- WARNING
- WARNING
- The Setup Menu
- The setup menu is used to modify the default printer settings. The setup menu should be accessed from the home screen. To access the setup menu press the SETUP key.
- Heat Shrink Serialization…
PANTHERLINK
4. Power the LS8EQ printer on and connect the USB cable from the printer to
your computer.
5. Press the SETUP button. Select PC Interface. Select Files/Printing.
6. The LS8EQ printer is now ready to print from Easy-Mark™.
7. In Easy-Mark™, select File, Print.
8. Select PanTher LS8EQ from the printer list. Each time you change the
LS8EQ format that you are using in Easy-Mark, you will need to select the
new paper size as well. To do this:
a. Click Properties.
b. Click Advanced.
c. Select the Paper Size that matches your label format in Easy-
Mark
d. Click OK
e. Click OK
9. Click OK to begin printing.
LS8EQ Printing with Easy-Mark Screens
53