User Manual
Table Of Contents
- PanTher™ LS8EQ
- Hand-Held Thermal Transfer Printer
- Operator’s Manual
- Section 1: Getting Started 3
- Introduction and Safe Operation 4-6
- General Description 7-8
- Loading Batteries and Label Cassette 9
- Keyboard Functions 10-11
- Creating Labels
- Creating Serializations 16-18
- Setting up the PanTher™ LS8EQ and Using File Manager 31-33
- Printer Cleaning Instructions 63-64
- Warranty Information ….. 69
- General Specifications 70
- Global Technical Support Information 71
- Batteries
- Replace All Six Batteries At The Same Time
- A01 A01 A02 A02 A03 A03
- A01 A02 A03 A01 A02 A03
- A01
- A01 A02
- A01
- A01
- A01
- A01
- A01 A02 A03 A04 A05 A06
- WARNING
- WARNING
- The Setup Menu
- The setup menu is used to modify the default printer settings. The setup menu should be accessed from the home screen. To access the setup menu press the SETUP key.
- Heat Shrink Serialization…
LABELING EXERCISES
Exercise 1
Create basic text on a self-laminating wire/cable label
• Step 1: Insert a self-laminating label cassette such as S100X150VAC
• Step 2: When prompted, select New Blank File. Save previous label if
necessary.
• Step 3: Type 1234
• Step 4: Press PRINT
Results:
Exercise 2
Create basic text on heat shrink tubing
• Step 1: Insert a heat shrink tubing label cassette such as H000X044H1C
• Step 2: When prompted, select New Blank File. Save previous label if
necessary.
• Step 3: Type ABCD
• Step 4: Press PRINT
Results:
1234
1234
1234
Hint: S100X150VAC defaults to 10
point font printed in Wire Marker
Mode.
You can adjust the font size by
pressing the SIZE key.
You can adjust the label mode by
pressing the LABEL key.
ABCD
ABCD
ABCD
Hint: H000X044H1C defaults to 10 point
font printed in Wire Marker Mode with
an “Auto” length setting.
You can adjust the font size by
pressing the SIZE key.
You can adjust the label mode by
pressing the LABEL key. For
example, try Tape Mode.
You can set a fixed tubing length by
using the LENGTH function. For
example, enter 200 for 2.00 inches.
55