User Manual
Table Of Contents
- PanTher™ LS8EQ
- Hand-Held Thermal Transfer Printer
- Operator’s Manual
- Section 1: Getting Started 3
- Introduction and Safe Operation 4-6
- General Description 7-8
- Loading Batteries and Label Cassette 9
- Keyboard Functions 10-11
- Creating Labels
- Creating Serializations 16-18
- Setting up the PanTher™ LS8EQ and Using File Manager 31-33
- Printer Cleaning Instructions 63-64
- Warranty Information ….. 69
- General Specifications 70
- Global Technical Support Information 71
- Batteries
- Replace All Six Batteries At The Same Time
- A01 A01 A02 A02 A03 A03
- A01 A02 A03 A01 A02 A03
- A01
- A01 A02
- A01
- A01
- A01
- A01
- A01 A02 A03 A04 A05 A06
- WARNING
- WARNING
- The Setup Menu
- The setup menu is used to modify the default printer settings. The setup menu should be accessed from the home screen. To access the setup menu press the SETUP key.
- Heat Shrink Serialization…
LABELING EXERCISES
Exercise 3
Create basic text on continuous tape
• Step 1: Insert a continuous tape label cassette such as T100X000VUC-
BK
• Step 2: When prompted, select New Blank File. Save previous label if
necessary.
• Step 3: Type 220 VOLTS
• Step 4: Press PRINT
Results:
Hint: T100X000VUC-BK defaults to 36 point
font printed in Tape Mode with an
“Auto” length setting.
You can adjust the font size by
pressing the SIZE key.
You can adjust the label mode by
pressing the LABEL key. For
example, try Vertical Mode.
You can set a fixed tape length by
using the LENGTH function. For
example, enter 400 for 4.00 inches.
2
2
0
V
O
L
T
S
Vertical Text
220 VOLTS
56