User Manual

Table Of Contents
LABELING EXERCISES
Exercise 4
Create serialized wire markers with heat shrink tubing
Step 1: Insert a heat shrink tubing label cassette such as H000X044H1C
Step 2: When prompted, select New Blank File. Save previous label if
necessary.
Step 3: Type WIRE
Step 4: Press INSERT key
Step 5: Press down arrow key once to highlight Serial
Step 6: Press
Step 7: Press right arrow key
Step 8: Type 1 for Start value
Step 9: Press
Step 10: Press right arrow key
Step 11: Type 3 for End value
Step 12: Press
twice
Step 13: Press PRINT
Results:
Hint: The Serial tool allows numeric or alphabetic serializations.
You can choose any increment from 1 to 99, print multiple
copies of a series, and even collate the copies of the series
items.
Heat shrink tubing can be partially cut to create a strand of
individual markers. The Cut/Pause function in the Setup
Menu will pause a print job between each consecutive label
for cutting. The print job will automatically restart after
cutting
WIRE1
WIRE1
WIRE2
WIRE2
WIRE3
WIRE3
WIRE1
WIRE1
WIRE2
WIRE2
WIRE3
WIRE3
…Using Cut/Pause Function
Heat Shrink Serialization…
57