User Manual
Table Of Contents
- PanTher™ LS8EQ
- Hand-Held Thermal Transfer Printer
- Operator’s Manual
- Section 1: Getting Started 3
- Introduction and Safe Operation 4-6
- General Description 7-8
- Loading Batteries and Label Cassette 9
- Keyboard Functions 10-11
- Creating Labels
- Creating Serializations 16-18
- Setting up the PanTher™ LS8EQ and Using File Manager 31-33
- Printer Cleaning Instructions 63-64
- Warranty Information ….. 69
- General Specifications 70
- Global Technical Support Information 71
- Batteries
- Replace All Six Batteries At The Same Time
- A01 A01 A02 A02 A03 A03
- A01 A02 A03 A01 A02 A03
- A01
- A01 A02
- A01
- A01
- A01
- A01
- A01 A02 A03 A04 A05 A06
- WARNING
- WARNING
- The Setup Menu
- The setup menu is used to modify the default printer settings. The setup menu should be accessed from the home screen. To access the setup menu press the SETUP key.
- Heat Shrink Serialization…
LABELING EXERCISES
Exercise 5
Create a symbol label on continuous tape
• Step 1: Insert a continuous tape label cassette, such as T100X000VXC-
BK
• Step 2: When prompted, select New Blank File. Save previous label if
necessary.
• Step 3: Press SHIFT key and let go
• Step 4: Press A key
• Step 5: Press SPACE
• Step 6: Type CAUTION
• Step 7: Press PRINT
Exercise 6
Create terminal block labels
• Step 1: Insert a terminal block cassette (T024X000FJC-BK,
T031X000FJC-BK, or T038X000FJC-BK)
• Step 2: When prompted, select New Blank File. Save previous label if
necessary.
• Step 3: Enter the terminal spacing (ie. 0.25”)
• Step 4:
o Create text….
Each terminal has up to 8 lines available. You may
need to increase the terminal space or decrease the
font size to fit additional lines. Up to 9 terminals can be
created in this way.
Use the Page key to move to the next or to the previous
terminal
o …or create a serialization…
Press the INSERT key, select serial
Enter start, end, and increment values
CAUTION
Results:
58