User Manual
Table Of Contents
- PanTher™ LS8EQ
- Hand-Held Thermal Transfer Printer
- Operator’s Manual
- Section 1: Getting Started 3
- Introduction and Safe Operation 4-6
- General Description 7-8
- Loading Batteries and Label Cassette 9
- Keyboard Functions 10-11
- Creating Labels
- Creating Serializations 16-18
- Setting up the PanTher™ LS8EQ and Using File Manager 31-33
- Printer Cleaning Instructions 63-64
- Warranty Information ….. 69
- General Specifications 70
- Global Technical Support Information 71
- Batteries
- Replace All Six Batteries At The Same Time
- A01 A01 A02 A02 A03 A03
- A01 A02 A03 A01 A02 A03
- A01
- A01 A02
- A01
- A01
- A01
- A01
- A01 A02 A03 A04 A05 A06
- WARNING
- WARNING
- The Setup Menu
- The setup menu is used to modify the default printer settings. The setup menu should be accessed from the home screen. To access the setup menu press the SETUP key.
- Heat Shrink Serialization…
APPLICATION BASED LABEL WIZARD (F4)
Using the Table Entry Tool in the Label Wizard
1. From within the Label Wizard, select TABLE.
2. Use the right and left arrow keys to scroll between the table parameters.
3. Press ENTER to select a parameter. An on-screen window will appear.
4. Type the value for the selected parameter in the on-screen window.
5. Press ENTER.
6. The Table entry layout on the screen indicates the current item number,
the number of copies for the current item, and the current line number
within the item.
7. Press ITM+ to move to the next item. Press ITM- to move to the previous
item. The maximum number of items (including copies) is 100.
8. Use the up and down arrow keys to change line number. There are 8
lines available for text.
9. The QTY function displays the total number of items (including copies) in
the table.
10. Press Shift and then F10 to save the serialization and exit the Label
Wizard.
11. The TABLE that you have created is stored in a data file. The data tool
appears on the home screen. To edit this file, highlight the icon on the
home screen, press SHIFT, and press the INSERT key.
12. Press F4 to restart the Label Wizard for a new TIA compliant labeling
application.
13. The TABLE entry tool in the LS8EQ printer is similar to the Text/Table
label wizard function within Easy-Mark™ labeling software.
Creating a Serialization in the Label Wizard (see exercise 9 above)
1. From within the Label Wizard, select SER for serialization.
2. Use the right and left arrow keys to scroll between serialization
parameters.
3. Press ENTER to select a parameter. An on-screen window will appear.
4. Type the value for the selected parameter in the on-screen window.
5. Press ENTER.
6. Repeat steps 2-4 for each parameter.
7. Press Shift and then F10 to save the serialization and exit the Label
Wizard.
63