User Manual
Table Of Contents
- PanTher™ LS8EQ
- Hand-Held Thermal Transfer Printer
- Operator’s Manual
- Section 1: Getting Started 3
- Introduction and Safe Operation 4-6
- General Description 7-8
- Loading Batteries and Label Cassette 9
- Keyboard Functions 10-11
- Creating Labels
- Creating Serializations 16-18
- Setting up the PanTher™ LS8EQ and Using File Manager 31-33
- Printer Cleaning Instructions 63-64
- Warranty Information ….. 69
- General Specifications 70
- Global Technical Support Information 71
- Batteries
- Replace All Six Batteries At The Same Time
- A01 A01 A02 A02 A03 A03
- A01 A02 A03 A01 A02 A03
- A01
- A01 A02
- A01
- A01
- A01
- A01
- A01 A02 A03 A04 A05 A06
- WARNING
- WARNING
- The Setup Menu
- The setup menu is used to modify the default printer settings. The setup menu should be accessed from the home screen. To access the setup menu press the SETUP key.
- Heat Shrink Serialization…
PRINTER TROUBLESHOOTING
This section helps identify printer conditions and problems that can often be
solved by the user. If you are unable to correct the problem contact Panduit
Technical Support at 866-871-4571 or Panduit Customer Service at 800-777-
3300.
SYMPTOM
ACTION
POWER
Printer does not
power up properly,
and LCD does not
come on.
• To turn printer ON, press the power button.
• Make sure that 6 AA alkaline batteries are loaded in
the printer. If problem persists, replace batteries.
• Plug in AC Adapter.
PRINTING
Not printing.
• Make sure printer:
1. Is turned ON
2. Has label cassette loaded properly.
3. Label media is fed beneath guide arm on
cassette.
4. Print head latch is locked.
5. Has text or tools on the screen to print.
Tools Too Big!
• The items on the home screen are too large for the
printable area. You can:
• Reduce the text size on the home screen
• Reduce the symbol size
• Reduce the bar code size
• Rotate the label
• Use a larger label
• If you are using continuous tape or continuous
heat shrink tubing, increase the length of your
label or set your length to AUTO.
67