Cut Sheet

A B
DUPLEX LC
(TYPE L)
SIMPLEX LC
(TYPE 1)
ST
(TYPE 2)
SIMPLEX SC
(TYPE 3)
DUPLEX SC
(TYPE S)
NOTES:
1. CABLE ASSEMBLY (WITH CONNECTORS):
A. SEE SHEET 2 FOR PART NUMBER MATRIX.
B. CANNOT BE LESS THAN THE LENGTH SPECIFIED IN THE PART NUMBER.
C. THE MAXIMUM CABLE LENGTH IS NOT TO EXCEED 10cm (4") OVER
SPECIFIED LENGTH FOR LESS THAN 10 METER; AND +1%/-0% GREATER
THAN 10 METERS.
D. TIP TO TIP LENGTH IS MEASURED WITHOUT DUST CAPS INSTALLED.
E. PATCHCORD ROUTING CONFIGURATION IS "A" TO "B".
F. THIS DRAWING SHALL BE APPLICABLE TO ANY LENGTH PATCHCORD AS
DESIGNATED BY THE PART NUMBER, WHERE M=METER.
2. TECHNICAL SPECIFICATIONS:
A. OPERATING TEMPERATURE RANGE IS FROM -10 C TO +60 C.
B. CONNECTORS ARE 'FOCIS' COMPLIANT.
C. CABLE ASSEMBLIES COMPLY WITH THE REQUIREMENTS OF TIA/EIA-568-C.3
OR EQUIVALENT IEC STANDARDS.
D. ALL MATERIALS AND COMPONENTS USED MUST MEET THE MATERIAL
RESTRICTIONS OF RoHS, (EUROPEAN DIRECTIVE 2011/65/EC ON THE
RESTRICTION OF HAZARDOUS SUBSTANCES) AS PROPOSED BY THE RoHS
TECHNICAL ADAPTATION COMMITTEE.
3. PACKAGING:
A. CABLE ASSEMBLY SHIPPED WITH DUST CAPS INSTALLED.
B. UNIT QUANTITY: 1 PATCHCORD/PIGTAIL PER BAG.
SM PC MM PC SM PC
CONNECTOR
TYPE
CONNECTOR INSERTION/RETURN LOSS SPECIFICATIONS
MAXIMUM INSERTION LOSS
(PER CONNECTOR)
MINIMUM RETURN LOSS
(PER CONNECTOR)
NETKEY LC
NETKEY SC
NETKEY ST
0.30dB
0.30dB
0.30dB 0.30dB 50dB
0.30dB
0.30dB 50dB
20dB
50dB
20dB
20dB
1
SERIALIZED LABEL
LEFT SIDE FIBER OPTIC
CONNECTORS
RIGHT SIDE FIBER OPTIC
CONNECTORS
FIBER OPTIC CONNECTOR TYPES
(POSITIONS 9 AND 11 OF PART NUMBER)
FOR 1.6mm/1.8mm/3.0mm DUPLEX PATCHCORD
CABLE ASSEMBLIES
SERIALIZED LABEL
FIBER OPTIC
CONNECTOR
FOR 900um SIMPLEX PIGTAIL
CABLE ASSEMBLIES
MM PC
MM PC
(OM3)
26dB
26dB
26dB
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
B
AA
B
1 2
2 1
M01302DD/00
M01302DD_DC/00A
TITLE
NETKEY PATCHCORDS AND PIGTAILS
CUSTOMER DRAWING
ITEM REVISION NAME
DATASET FILE NAME
PART NUMBER
UNLESS OTHERWISE SPECIFIED,
DIMENSIONAL TOLERANCES ARE: IN [mm]
SEE SHEET 2
.X
.03 [.762]
.XXX
.005 [.127]
.XX
.01 [.25]
ANGLES
1
DRAWING NUMBER:
THIRD ANGLE
PROJECTION
M01302DD-DC
DRAWN BY DATE CHK SCALE
SIZE
SAT 06-05-14 JGD NONE SHT 1 OF 2
B
00 06-05-14 SAT JGD RWB RELEASED TO PRODUCTION M01302DD-DC
REV DATE BY CHK APR DESCRIPTION ECN
PRINTED
CABLE
PRINTED
CABLE