Installation instructions

Page 1 of 2

NETKEY

NETWORK COMPONENTS

CONTRACTOR GRADE

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

NK406C

Puck

Notch

Orient jack

as shown

Label

(NKSPB)

NetKey Category 5e, 6 & 6A Jack Modules

Part Number: NKP5E88M**, NK688M**, NK6X88M**

1.5" (38.1mm)

CWST

Trim pair separator and/or

filler if present.

T568AT568B

P4 P3

P1 P2

P4 P2

P1 P3

T568 BA BA

Do not untwist

more then 1/8"

from the IDC

tower

Option 1 Option 2

(T568B shown)

PDT110

Tool

(T568B shown)

Retention

Cap

** Denotes color.

PAGE 1
NETKEY NetKey Category 5e, 6 & 6A Jack Modules NETWORK COMPONENTS Part Number: NKP5E88M**, NK688M**, NK6X88M** CONTRACTOR GRADE INSTALLATION INSTRUCTIONS © Panduit Corp. 2013 NK406C Retention Cap 1 Orient jack as shown Label Notch Puck (NKSPB) 2 3 CWST T568B T568A P4 P3 P4 P2 P1 P2 P1 P3 1.5" (38.1mm) Trim pair separator and/or filler if present.
PAGE 2
© Panduit Corp. 2013 INSTALLATION INSTRUCTIONS NK406C 7 T568 BA BA 8 9 10 11 Depress latch on jack and gently tilt out. Notes: 1. For specified performance, follow TIA/EIA 568-B installation guidelines. 2. Jack Modules can terminate PVC or Plenum rated 22-26 AWG solid or stranded IWC cable with 0.048 inch (1.2 mm) maximum insulated conductor outside diameter. 3. Jack Modules may be re-terminated a minimum of 20 times. 4. For technical and performance information, consult PANDUIT Technical Support.