Installation Manual

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

RW183

OFFICE FURNITURE CORNER RACEWAY AND FITTINGS

FOR USE WITH PANDUIT OFFICE FURNITURE

RACEWAY COMMUNICATION ROUTING SYSTEM

Page 1 of 3

Panduit Part Numbers: OFCR70**, OFCRC70**, OFR20OFCR70**4, OFR20OFCR70**2, OFR20OFCR70**1, OFCR70EC**,

OF70FV4** [OF70FV2**, OF70P**, OF70PG** (NOT SHOWN)], OFR20OFCR70**4P,

OFR20OFCR70**2P, OFR20OFCR70**1P

4 POSITION

1 POSITION

2 POSITION

1 POSITION WITH OPTION

FOR RACEWAY IN 4 DIRECTIONS

2 POSITION WITH OPTION

FOR RACEWAY IN 4 DIRECTIONS

4 POSITION WITH OPTION

FOR RACEWAY IN 2 DIRECTIONS

OPTIONAL CONFIGURATIONS

PAGE 1
OFFICE FURNITURE CORNER RACEWAY AND FITTINGS FOR USE WITH PANDUIT OFFICE FURNITURE RACEWAY COMMUNICATION ROUTING SYSTEM INSTALLATION INSTRUCTIONS © Panduit Corp.
PAGE 2
INSTALLATION INSTRUCTIONS © Panduit Corp. 2014 1 2 RW183 4 3 #8 SCREW L - 1/8” L OPTIONAL CABLE ROUTING FROM DESKTOP 1 FOR PROPER TAPE ADHESION, SURFACE MUST BE CLEAN AND DRY PRIOR TO INSTALLATION. PRESSURE MUST BE APPLIED FOR 20 SEC. AT POINT OF APPLICATION. 3 2 2”min 7/8” CUT OUT NOT TO ALLOW GREATER THAN 1/8” CLEARANCE AROUND CABLE AFTER INSTALLATION For Technical Support: www.panduit.com/resources/install_maintain.
PAGE 3
INSTALLATION INSTRUCTIONS © Panduit Corp. 2014 BYPASS - 1 POSITION BYPASS - 2 POSITION 2 1 RW183 BYPASS - 4 POSITION 4 3 L-1/8” L Note: Minimum bend radius on fittings is .625”. E-mail: techsupport@panduit.com For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp www.panduit.com Page 3 of 3 Phone: 866-405-6654 Rev.