Cut Sheet
Table Of Contents
- Panduit_00_C1_C2
- Panduit_00_Safety_Signs_Intro_01-05
- Panduit_01_Safety_Signs_Labels_06-34
- Panduit_02_Safety_Tags_35-43
- Panduit_03_CableTies_WireMarkers_44-49
- Panduit_04_Labelmakers_50-52
- Panduit_05_ID_Tags_Pipe_Markers_53-58
- Panduit_06_Lockout_Tagout_59-69
- Panduit_07_HazCom_GHS_70-73
- Panduit_08_Traffic_Signs_74-79
- Panduit_09_Floor_Signs_Tapes_80-86
- Panduit_10_Barriers_Barricades_87-93
- Panduit_11_Motivation_94
- Panduit_12_Index_Terms_95-96
- Panduit_00_C3_C4
12
Safety Signs & Labels
Cross Barrier
Cross out open entryway to a Conned Space.
• Crossbuck design fits onto bolt pattern of vertical confined space entry
• Attention-getting diagonal red-white stripes are surface-printed and protected
by laminate film
• Adjustable crossbuck pivots flat for easy transport and storage
• Crossbuck arms measure 6" x 42" with 1.5" x 9" slotted cutouts at each end
• 11.5" x 11.5" octagonal sign is printed on 0.055" polyethylene plastic
• Fits 22" to 38" outside bolt-to-bolt*
• Crossbucks available in two materials:
- Standard style is 0.060" polycarbonate plastic – durable to withstand initial impacts
and scratches
- Heavy-Duty style is 0.118" Poly-Aluminum – combines aluminum and thermoplastic
core for high strength and impact protection
* To verify proper fit of the Barrier for your entryway, measure the length across the entryway
from bolt to bolt; then measure the bolt diameter and compare to slot width.
Plastic PCSP0006
Poly-Aluminum PCSP0009
Plastic PCSP0007
Poly-Aluminum PCSP0010
Plastic PCSP0008
Poly-Aluminum PCSP0011
Plastic PCSP0012
Poly-Aluminum PCSP0013
Description Material UOM
Standard Plastic Each
Heavy-Duty Poly-Aluminum Each
Mark conned spaces that are otherwise difcult to label
by using ink or paint stencils.
• 0.010" thermo-plastic stencils
• Fits a 7" x 10" image area
• Header line has approx. 2" H letters
• Message area has 1" H letters
Permit Holder Board
Entry Permit Pad
Stencils
UOM
Each
7" x 10" PCSP0003
7" x 10" PCSP0004 7" x 10" PCSP0005
Board communicates Conned Space requirements and
holds related permits.
• Hang or set board near or at entrance of confined space to be readily
seen by all
• Features large sign legend with clear acrylic pocket
• Holds 8.5" x 11" entry permit sheets (available separately)
• Constructed of durable 0.125" thick PVC
• Measures 12"H x 19"W with mounting holes
• Not recommended for outdoor use
• Easy to write on, 8.5" x 11" sheets
• Conveniently packaged in easy to
tear off pads
• 100 sheets
per pad
Comply with OSHA 29 CFR
§ 1910.146(e)(1)
Part No. UOM
PCSP0002 100 Sheets/Pad
Part No. UOM
PCSP0001 Each