Cut Sheet

Safety Tags 35
800.777.3300
|
Panduit.com
Choose the Right Tag Material
Select a material based on your application requirements to ensure your message is conveyed clearly and effectively.
Poly Cardstock (PCT)
Pulp-free tags have no wood pulp or paper content, unlike standard
cardstock tags, and are available at an economical price.
Material Features
• Thin, pliable 0.010" poly-based
tags will not crack, distort,
or shrink
• Waterproof and tear-resistant
from incidental pulls and snags
• Can be printed on both sides
• Scuff-resistant matte surface
is easy to write on with pen
or marker
• 3/8" non-reinforced hole
Applications
• Indoor usage
• Non-reinforceable hole
Laminate Plastic (PCTL)
Nearly indestructible tag is made to withstand tough, abusive conditions.
Printed
Message
0.010"
Cardstock
Tag
3/8" Metal
Grommet Hole
Material Features
• 0.010" cardstock tag
sealed by a thick, 0.007"
laminate on both sides – right
to the edges – to protect the
printed image
• Tear-proof, weatherproof and
chemical-resistant
• Durable to withstand dirt,
grease, liquid splashes and
rough handling
• Scratch-resistant matte-finish
laminate surface is easy to
write on with pen or marker
• 3/8" hole, reinforced by a
pull-proof metal grommet
• Includes 7.4"L , min. 50-lb.
strength, black nylon cable ties
(one per tag)
• Available in Lockout Tags
Applications
• Indoor and outdoor usage - when the most durable tags are required
• Chemical applications and tough industrial settings
0.007"
Laminate
Both Sides
Printed
Message
0.010"
Pulp-Free
Cardstock
3/8" Hole
Rigid Plastic (PVT)
High-strength rigid plastic tag is ideal for use in tough industrial
environments – resists chemicals, tears, and abrasions.
Material Features
• 0.015" thick rigid plastic tags are
relatively bendable
• Matte surface is easy to write on
with pen or marker
• Can be printed on both sides
• 3/8" hole, reinforced by a
pull-proof metal grommet
• Includes 7.4"L , min. 50-lb. strength,
black nylon cable ties (one per tag)
Applications
• Indoor and temporary outdoor usage
• Chemical and dirty/greasy
environments
• 2 years outdoors
Printed
Message
0.015"
Plastic
3/8" Metal
Grommet Hole
Self-Laminating Tags (PST)
Protect written messages and photos when your life is on the line.
Protected
Printed
Image
3/8" Metal
Grommet Hole
• Write information and insert a
photo (where applicable),
then laminate your own tag
• Protection from moisture,
chemicals and dirt
• Prevents tampering with
the information
• Dual self-laminating polyester
flaps pre-attached at the top
• Reinforced by a pull-proof
metal grommet
• Includes 7.4"L , min. 50-lb.
strength, black nylon cable ties
(one per tag)
0.010"
Overlaminate
Flap Both
Sides
Safety Tags
Our selection of safety tags is just
as diverse as your workplace.
• Prevent the potential for accidental injury and
property damage
• Alert, call out or draw attention to temporary hazards
• Required critical tool in safety, performance and
maintenance operations
We Have What You Need
Look to us for the tags that you need! In addition
to standard OSHA safety tags, our comprehensive
selection of safety tags incorporates key categories
like Lockout/Tagout, Equipment Status and
Record Inspection.
Safety Tags Identify Temporary Hazards
Safety Tags...
• Call out attention to hazards
• Prevent the potential for accidental injury or property damage
• Identify and inform that a hazardous condition exists
Attach and hang the tags as close as possible to the hazard situation where the tag can be readily seen. Tags are to
remain in-place until the hazard is eliminated or the hazardous operation is complete.
The Occupational Safety and Health Administration (OSHA 29 CFR §1910.145) and American National Standards
Institute (ANSI Z535) provide specifications, designs, applications, and uses of accident prevention tags. Tags can be
printed in a variety of colors and messages to meet your needs. They are typically designed with an attention-getting
signal word for a degree of hazard along with a specific message and areas to write in particular information.
Safety tags are an inexpensive, fast solution for temporary marking and identification of hazards.
Note: A tag shall not be used in place of a permanent sign or label for hazards in normal use,
operation or maintenance.